Effect of MgO contents on the dissolution rate of alumina into molten CaO-SiO2-Al2O3-MgO slags

Shoichirou Taira, Akihiro Machida, Kunihiko Nakashima, Katsumi Mori

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)

抄録

Dissolution rates of sintered alumina into molten CaO-SiO2-9mass%Al2O3-MgO(CaO/SiO2=0.80) slags were measured by a rotating specimen method. The dissolution rates into slags containing 5, 10, and 15mass% MgO were measured at 1773, 1823 and 1873K, and the revolution speed varied from 100 to 600 rpm. The microstructures of specimens after experiments were examined by an electron probe microanalyzer(EPMA), and the dissolution mechanism was discussed. The dissolution rate of alumina increased with increasing revolution speed and temperature. The dissolution rate of alumina into the slags containing more than 10mass% MgO were increased more rapidly with increasing revolution speed and temperatures, compared with that into the slag containing 5mass% MgO. The dissolution rate of alumina decreased with increasing MgO content up to 15mass%. According to the EPMA analysis, a deposition of MgO · Al2O3 spinel particles was observed in slag adjacent to the alumina specimen. The spinel particles formed a layer in slags containing more than 10mass% MgO, and the thickness of the layer was increased with increasing MgO content in slags. These morphological differences of the spinel layers suggest that the spinel layers suppress the flow of slag components, and the dissolution rate decreases with increasing MgO content. Moreover, the morphology of spinel layer was changed with revolution speed, this morphological change is considered to be the reason why the dependence of the dissolution rate on revolution speed differs by the MgO content in slag.

元の言語英語
ページ(範囲)99-104
ページ数6
ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
82
発行部数2
DOI
出版物ステータス出版済み - 1 1 1996

Fingerprint

Aluminum Oxide
slags
Slags
Molten materials
dissolving
Dissolution
Alumina
aluminum oxides
spinel
electron probes
Sintered alumina
Electrons
spinell
Temperature
microstructure
Microstructure
temperature

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

これを引用

Effect of MgO contents on the dissolution rate of alumina into molten CaO-SiO2-Al2O3-MgO slags. / Taira, Shoichirou; Machida, Akihiro; Nakashima, Kunihiko; Mori, Katsumi.

:: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 巻 82, 番号 2, 01.01.1996, p. 99-104.

研究成果: ジャーナルへの寄稿記事

@article{eb594a3ab8d24220bd968aaefbf13b77,
title = "Effect of MgO contents on the dissolution rate of alumina into molten CaO-SiO2-Al2O3-MgO slags",
abstract = "Dissolution rates of sintered alumina into molten CaO-SiO2-9mass{\%}Al2O3-MgO(CaO/SiO2=0.80) slags were measured by a rotating specimen method. The dissolution rates into slags containing 5, 10, and 15mass{\%} MgO were measured at 1773, 1823 and 1873K, and the revolution speed varied from 100 to 600 rpm. The microstructures of specimens after experiments were examined by an electron probe microanalyzer(EPMA), and the dissolution mechanism was discussed. The dissolution rate of alumina increased with increasing revolution speed and temperature. The dissolution rate of alumina into the slags containing more than 10mass{\%} MgO were increased more rapidly with increasing revolution speed and temperatures, compared with that into the slag containing 5mass{\%} MgO. The dissolution rate of alumina decreased with increasing MgO content up to 15mass{\%}. According to the EPMA analysis, a deposition of MgO · Al2O3 spinel particles was observed in slag adjacent to the alumina specimen. The spinel particles formed a layer in slags containing more than 10mass{\%} MgO, and the thickness of the layer was increased with increasing MgO content in slags. These morphological differences of the spinel layers suggest that the spinel layers suppress the flow of slag components, and the dissolution rate decreases with increasing MgO content. Moreover, the morphology of spinel layer was changed with revolution speed, this morphological change is considered to be the reason why the dependence of the dissolution rate on revolution speed differs by the MgO content in slag.",
author = "Shoichirou Taira and Akihiro Machida and Kunihiko Nakashima and Katsumi Mori",
year = "1996",
month = "1",
day = "1",
doi = "10.2355/tetsutohagane1955.82.2_99",
language = "English",
volume = "82",
pages = "99--104",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "2",

}

TY - JOUR

T1 - Effect of MgO contents on the dissolution rate of alumina into molten CaO-SiO2-Al2O3-MgO slags

AU - Taira, Shoichirou

AU - Machida, Akihiro

AU - Nakashima, Kunihiko

AU - Mori, Katsumi

PY - 1996/1/1

Y1 - 1996/1/1

N2 - Dissolution rates of sintered alumina into molten CaO-SiO2-9mass%Al2O3-MgO(CaO/SiO2=0.80) slags were measured by a rotating specimen method. The dissolution rates into slags containing 5, 10, and 15mass% MgO were measured at 1773, 1823 and 1873K, and the revolution speed varied from 100 to 600 rpm. The microstructures of specimens after experiments were examined by an electron probe microanalyzer(EPMA), and the dissolution mechanism was discussed. The dissolution rate of alumina increased with increasing revolution speed and temperature. The dissolution rate of alumina into the slags containing more than 10mass% MgO were increased more rapidly with increasing revolution speed and temperatures, compared with that into the slag containing 5mass% MgO. The dissolution rate of alumina decreased with increasing MgO content up to 15mass%. According to the EPMA analysis, a deposition of MgO · Al2O3 spinel particles was observed in slag adjacent to the alumina specimen. The spinel particles formed a layer in slags containing more than 10mass% MgO, and the thickness of the layer was increased with increasing MgO content in slags. These morphological differences of the spinel layers suggest that the spinel layers suppress the flow of slag components, and the dissolution rate decreases with increasing MgO content. Moreover, the morphology of spinel layer was changed with revolution speed, this morphological change is considered to be the reason why the dependence of the dissolution rate on revolution speed differs by the MgO content in slag.

AB - Dissolution rates of sintered alumina into molten CaO-SiO2-9mass%Al2O3-MgO(CaO/SiO2=0.80) slags were measured by a rotating specimen method. The dissolution rates into slags containing 5, 10, and 15mass% MgO were measured at 1773, 1823 and 1873K, and the revolution speed varied from 100 to 600 rpm. The microstructures of specimens after experiments were examined by an electron probe microanalyzer(EPMA), and the dissolution mechanism was discussed. The dissolution rate of alumina increased with increasing revolution speed and temperature. The dissolution rate of alumina into the slags containing more than 10mass% MgO were increased more rapidly with increasing revolution speed and temperatures, compared with that into the slag containing 5mass% MgO. The dissolution rate of alumina decreased with increasing MgO content up to 15mass%. According to the EPMA analysis, a deposition of MgO · Al2O3 spinel particles was observed in slag adjacent to the alumina specimen. The spinel particles formed a layer in slags containing more than 10mass% MgO, and the thickness of the layer was increased with increasing MgO content in slags. These morphological differences of the spinel layers suggest that the spinel layers suppress the flow of slag components, and the dissolution rate decreases with increasing MgO content. Moreover, the morphology of spinel layer was changed with revolution speed, this morphological change is considered to be the reason why the dependence of the dissolution rate on revolution speed differs by the MgO content in slag.

UR - http://www.scopus.com/inward/record.url?scp=0030080677&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030080677&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane1955.82.2_99

DO - 10.2355/tetsutohagane1955.82.2_99

M3 - Article

VL - 82

SP - 99

EP - 104

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 2

ER -