Effect of palladium addition on the tarnishing of dental gold alloys

M. Ohta, M. Nakagawa, S. Matsuya

研究成果: ジャーナルへの寄稿記事

10 引用 (Scopus)

抄録

Tarnishing tests were carried out on Au-Cu-Ag and Au-Cu-Pd alloys. This study focused on the individual and combined effects of nobility, palladium content and microstructure. Tarnish resistance was almost perfect for the alloys with nobility higher than 50 at%, but it seemed to relate to the palladium : gold atomic ratio for the alloys with low nobility. Palladium inclusion reduced the tarnish susceptibility up to about 10 at%. This decrease in the degree of tarnishing was attributed to the decrease in the diffusion rate of S2 ion which resulted in a decrease in the growth rate of sulphide layer. Tarnishing of the alloy with low nobility was very sensitive to its microstructure. The tarnishing susceptibility of dual-phase Au-Cu-Ag alloy was twice as high as that of the single-phase alloy. However, palladium-bearing alloy showed no increase in the degree of tarnishing by phase separation. This may be attributed to the enrichment of palladium in the copper-rich phase.

元の言語英語
ページ(範囲)140-145
ページ数6
ジャーナルJournal of Materials Science: Materials in Medicine
1
発行部数3
DOI
出版物ステータス出版済み - 10 1 1990

Fingerprint

Dental alloys
Gold Alloys
Dental Alloys
Gold alloys
Palladium
Bearings (structural)
Microstructure
Sulfides
Phase separation
Gold
Copper
Ions
Growth

All Science Journal Classification (ASJC) codes

  • Biophysics
  • Bioengineering
  • Biomaterials
  • Biomedical Engineering

これを引用

Effect of palladium addition on the tarnishing of dental gold alloys. / Ohta, M.; Nakagawa, M.; Matsuya, S.

:: Journal of Materials Science: Materials in Medicine, 巻 1, 番号 3, 01.10.1990, p. 140-145.

研究成果: ジャーナルへの寄稿記事

@article{0c3455bb86fe402f881979855211955e,
title = "Effect of palladium addition on the tarnishing of dental gold alloys",
abstract = "Tarnishing tests were carried out on Au-Cu-Ag and Au-Cu-Pd alloys. This study focused on the individual and combined effects of nobility, palladium content and microstructure. Tarnish resistance was almost perfect for the alloys with nobility higher than 50 at{\%}, but it seemed to relate to the palladium : gold atomic ratio for the alloys with low nobility. Palladium inclusion reduced the tarnish susceptibility up to about 10 at{\%}. This decrease in the degree of tarnishing was attributed to the decrease in the diffusion rate of S2 ion which resulted in a decrease in the growth rate of sulphide layer. Tarnishing of the alloy with low nobility was very sensitive to its microstructure. The tarnishing susceptibility of dual-phase Au-Cu-Ag alloy was twice as high as that of the single-phase alloy. However, palladium-bearing alloy showed no increase in the degree of tarnishing by phase separation. This may be attributed to the enrichment of palladium in the copper-rich phase.",
author = "M. Ohta and M. Nakagawa and S. Matsuya",
year = "1990",
month = "10",
day = "1",
doi = "10.1007/BF00700873",
language = "English",
volume = "1",
pages = "140--145",
journal = "Journal of Materials Science: Materials in Electronics",
issn = "0957-4522",
publisher = "Springer New York",
number = "3",

}

TY - JOUR

T1 - Effect of palladium addition on the tarnishing of dental gold alloys

AU - Ohta, M.

AU - Nakagawa, M.

AU - Matsuya, S.

PY - 1990/10/1

Y1 - 1990/10/1

N2 - Tarnishing tests were carried out on Au-Cu-Ag and Au-Cu-Pd alloys. This study focused on the individual and combined effects of nobility, palladium content and microstructure. Tarnish resistance was almost perfect for the alloys with nobility higher than 50 at%, but it seemed to relate to the palladium : gold atomic ratio for the alloys with low nobility. Palladium inclusion reduced the tarnish susceptibility up to about 10 at%. This decrease in the degree of tarnishing was attributed to the decrease in the diffusion rate of S2 ion which resulted in a decrease in the growth rate of sulphide layer. Tarnishing of the alloy with low nobility was very sensitive to its microstructure. The tarnishing susceptibility of dual-phase Au-Cu-Ag alloy was twice as high as that of the single-phase alloy. However, palladium-bearing alloy showed no increase in the degree of tarnishing by phase separation. This may be attributed to the enrichment of palladium in the copper-rich phase.

AB - Tarnishing tests were carried out on Au-Cu-Ag and Au-Cu-Pd alloys. This study focused on the individual and combined effects of nobility, palladium content and microstructure. Tarnish resistance was almost perfect for the alloys with nobility higher than 50 at%, but it seemed to relate to the palladium : gold atomic ratio for the alloys with low nobility. Palladium inclusion reduced the tarnish susceptibility up to about 10 at%. This decrease in the degree of tarnishing was attributed to the decrease in the diffusion rate of S2 ion which resulted in a decrease in the growth rate of sulphide layer. Tarnishing of the alloy with low nobility was very sensitive to its microstructure. The tarnishing susceptibility of dual-phase Au-Cu-Ag alloy was twice as high as that of the single-phase alloy. However, palladium-bearing alloy showed no increase in the degree of tarnishing by phase separation. This may be attributed to the enrichment of palladium in the copper-rich phase.

UR - http://www.scopus.com/inward/record.url?scp=0347796121&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0347796121&partnerID=8YFLogxK

U2 - 10.1007/BF00700873

DO - 10.1007/BF00700873

M3 - Article

AN - SCOPUS:0347796121

VL - 1

SP - 140

EP - 145

JO - Journal of Materials Science: Materials in Electronics

JF - Journal of Materials Science: Materials in Electronics

SN - 0957-4522

IS - 3

ER -