Effect of preadsorption of organic additives on the appearance and morphology of electrogalvanized steel sheets

Hiroaki Nakano, Takashi Ura, Satoshi Oue, Shigeo Kobayashi

研究成果: ジャーナルへの寄稿記事

7 引用 (Scopus)

抄録

Zn electrodeposition was performed galvanostatically on steel sheets at 1 500 A/m2 in an agitated sulfate solution at 40°C to investigate the effect of preadsorption of organic additives on the lightness and morphology of Zn. The organic additives employed were classified into two types: 1) polyethylene glycol (PEG), gelatin, and stearyl dimethylbenzyl ammonium chloride (SDBAC) (Type I), which exhibit a polarization effect for Zn deposition; and 2) saccharin and sodium lauryl sulfate (Type II), which exhibit no polarization effect for Zn deposition. The platelet crystals of deposited Zn were reduced in size with preadsorption of all the organic additives considered. The observed decrease in the size of Zn platelet crystals with preadsorption is attributed to both an increase in the overpotential for Zn deposition and a decrease in the epitaxial growth of Zn on steel substrates. The preferred orientation of the {0001} Zn basal plane significantly decreased because of an increase in Zn deposition overpotential owing to preadsorption of PEG and gelatin, and the orientation slightly decreased with saccharin and sodium lauryl sulfate in spite of the absence of a polarization effect on Zn deposition. The surface roughness of deposited Zn decreased with preadsorption of organic additives with the exception of SDBAC. This is due to a decrease in the size of Zn platelet crystals. The lightness of deposited Zn was increased by preadsorption of organic additives with the exception of SDBAC. Because Zn deposited nonuniformly with preadsorption of SDBAC, the surface roughness of Zn increased and the lightness decreased.

元の言語英語
ページ(範囲)1653-1660
ページ数8
ジャーナルisij international
54
発行部数7
DOI
出版物ステータス出版済み - 1 1 2014

Fingerprint

Steel sheet
Ammonium Chloride
Platelets
Saccharin
Sodium dodecyl sulfate
Gelatin
Polarization
Sodium Dodecyl Sulfate
Crystals
Polyethylene glycols
Surface roughness
Steel
Epitaxial growth
Electrodeposition
Sulfates
Substrates

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

これを引用

Effect of preadsorption of organic additives on the appearance and morphology of electrogalvanized steel sheets. / Nakano, Hiroaki; Ura, Takashi; Oue, Satoshi; Kobayashi, Shigeo.

:: isij international, 巻 54, 番号 7, 01.01.2014, p. 1653-1660.

研究成果: ジャーナルへの寄稿記事

@article{75b93a39e93b4dfcb659901eab1ef401,
title = "Effect of preadsorption of organic additives on the appearance and morphology of electrogalvanized steel sheets",
abstract = "Zn electrodeposition was performed galvanostatically on steel sheets at 1 500 A/m2 in an agitated sulfate solution at 40°C to investigate the effect of preadsorption of organic additives on the lightness and morphology of Zn. The organic additives employed were classified into two types: 1) polyethylene glycol (PEG), gelatin, and stearyl dimethylbenzyl ammonium chloride (SDBAC) (Type I), which exhibit a polarization effect for Zn deposition; and 2) saccharin and sodium lauryl sulfate (Type II), which exhibit no polarization effect for Zn deposition. The platelet crystals of deposited Zn were reduced in size with preadsorption of all the organic additives considered. The observed decrease in the size of Zn platelet crystals with preadsorption is attributed to both an increase in the overpotential for Zn deposition and a decrease in the epitaxial growth of Zn on steel substrates. The preferred orientation of the {0001} Zn basal plane significantly decreased because of an increase in Zn deposition overpotential owing to preadsorption of PEG and gelatin, and the orientation slightly decreased with saccharin and sodium lauryl sulfate in spite of the absence of a polarization effect on Zn deposition. The surface roughness of deposited Zn decreased with preadsorption of organic additives with the exception of SDBAC. This is due to a decrease in the size of Zn platelet crystals. The lightness of deposited Zn was increased by preadsorption of organic additives with the exception of SDBAC. Because Zn deposited nonuniformly with preadsorption of SDBAC, the surface roughness of Zn increased and the lightness decreased.",
author = "Hiroaki Nakano and Takashi Ura and Satoshi Oue and Shigeo Kobayashi",
year = "2014",
month = "1",
day = "1",
doi = "10.2355/isijinternational.54.1653",
language = "English",
volume = "54",
pages = "1653--1660",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "7",

}

TY - JOUR

T1 - Effect of preadsorption of organic additives on the appearance and morphology of electrogalvanized steel sheets

AU - Nakano, Hiroaki

AU - Ura, Takashi

AU - Oue, Satoshi

AU - Kobayashi, Shigeo

PY - 2014/1/1

Y1 - 2014/1/1

N2 - Zn electrodeposition was performed galvanostatically on steel sheets at 1 500 A/m2 in an agitated sulfate solution at 40°C to investigate the effect of preadsorption of organic additives on the lightness and morphology of Zn. The organic additives employed were classified into two types: 1) polyethylene glycol (PEG), gelatin, and stearyl dimethylbenzyl ammonium chloride (SDBAC) (Type I), which exhibit a polarization effect for Zn deposition; and 2) saccharin and sodium lauryl sulfate (Type II), which exhibit no polarization effect for Zn deposition. The platelet crystals of deposited Zn were reduced in size with preadsorption of all the organic additives considered. The observed decrease in the size of Zn platelet crystals with preadsorption is attributed to both an increase in the overpotential for Zn deposition and a decrease in the epitaxial growth of Zn on steel substrates. The preferred orientation of the {0001} Zn basal plane significantly decreased because of an increase in Zn deposition overpotential owing to preadsorption of PEG and gelatin, and the orientation slightly decreased with saccharin and sodium lauryl sulfate in spite of the absence of a polarization effect on Zn deposition. The surface roughness of deposited Zn decreased with preadsorption of organic additives with the exception of SDBAC. This is due to a decrease in the size of Zn platelet crystals. The lightness of deposited Zn was increased by preadsorption of organic additives with the exception of SDBAC. Because Zn deposited nonuniformly with preadsorption of SDBAC, the surface roughness of Zn increased and the lightness decreased.

AB - Zn electrodeposition was performed galvanostatically on steel sheets at 1 500 A/m2 in an agitated sulfate solution at 40°C to investigate the effect of preadsorption of organic additives on the lightness and morphology of Zn. The organic additives employed were classified into two types: 1) polyethylene glycol (PEG), gelatin, and stearyl dimethylbenzyl ammonium chloride (SDBAC) (Type I), which exhibit a polarization effect for Zn deposition; and 2) saccharin and sodium lauryl sulfate (Type II), which exhibit no polarization effect for Zn deposition. The platelet crystals of deposited Zn were reduced in size with preadsorption of all the organic additives considered. The observed decrease in the size of Zn platelet crystals with preadsorption is attributed to both an increase in the overpotential for Zn deposition and a decrease in the epitaxial growth of Zn on steel substrates. The preferred orientation of the {0001} Zn basal plane significantly decreased because of an increase in Zn deposition overpotential owing to preadsorption of PEG and gelatin, and the orientation slightly decreased with saccharin and sodium lauryl sulfate in spite of the absence of a polarization effect on Zn deposition. The surface roughness of deposited Zn decreased with preadsorption of organic additives with the exception of SDBAC. This is due to a decrease in the size of Zn platelet crystals. The lightness of deposited Zn was increased by preadsorption of organic additives with the exception of SDBAC. Because Zn deposited nonuniformly with preadsorption of SDBAC, the surface roughness of Zn increased and the lightness decreased.

UR - http://www.scopus.com/inward/record.url?scp=84906724664&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84906724664&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.54.1653

DO - 10.2355/isijinternational.54.1653

M3 - Article

VL - 54

SP - 1653

EP - 1660

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 7

ER -