Effect of surface water on tritium release behavior from Li 4SiO4

T. Hanada, S. Fukada, M. Nishikawa, K. Suematsu, N. Yamashita, T. Kanazawa

研究成果: Contribution to journalArticle

10 引用 (Scopus)

抜粋

The tritium release model to represent the release behavior of bred tritium from solid breeder materials has been developed by the blanket group of Kyushu University. It has been found that water is released to the purge gas from solid breeder materials and that this water affects the tritium release behavior. In this study, the amount of surface water released from Li4SiO 4 is quantified by the experiment. In addition, the tritium release behavior from Li4SiO4 are estimated based on the tritium release model using parameters obtained in our studies under conditions of commercial reactor operation and ITER test blanket module operation. The effect of the surface water on tritium release behavior is discussed from the obtained results. Moreover, the tritium inventory of Li4SiO4 is discussed based on calculation under the unsteady state condition. Further, the effects of grain size and temperature on distribution of tritium inventory under the steady state condition are evaluated, and the optimal grain size is discussed from the view point of tritium release from Li4SiO 4.

元の言語英語
ページ(範囲)998-1001
ページ数4
ジャーナルFusion Engineering and Design
85
発行部数7-9
DOI
出版物ステータス出版済み - 12 2010

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

フィンガープリント Effect of surface water on tritium release behavior from Li <sub>4</sub>SiO<sub>4</sub>' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Hanada, T., Fukada, S., Nishikawa, M., Suematsu, K., Yamashita, N., & Kanazawa, T. (2010). Effect of surface water on tritium release behavior from Li 4SiO4. Fusion Engineering and Design, 85(7-9), 998-1001. https://doi.org/10.1016/j.fusengdes.2009.12.002