### 抄録

Linear Discharge Type Analogue Charge Division is a method of determining the position of ionization in the Single Wire Position Sensitive Proportional Counter (SWPC). The division output is proportional to the position of ionization where the numerator input is the pulse (V_{1}) taken from the one end of the anode and the denominator input is the sum of the pulses (V_{1}+ V2) taken from both ends. There exists a difference between the timing of the peak of the numerator and denominator input pulses which varies with the position and shows a non-linear characteristic. As the peak-hold gate signal of the analogue charge division is obtained from the denominator input pulse, the effect is reflected on the output of the charge division. The timing non-linearity of the input signal and the ultimate position output non-linearity are estimated analytically. The effect is evaluated for various parameters, such as, the intrinsic time constant of SWPC, the shaping time constant and gate signal's delay etc. The position output for a 1.8m long (15µmф) SWPC has been obtained experimentally and the observed output non-linearity is presented and compared with the estimation.

元の言語 | 英語 |
---|---|

ページ（範囲） | 573-578 |

ページ数 | 6 |

ジャーナル | journal of nuclear science and technology |

巻 | 30 |

発行部数 | 6 |

DOI | |

出版物ステータス | 出版済み - 1 1 1993 |

### Fingerprint

### All Science Journal Classification (ASJC) codes

- Nuclear and High Energy Physics
- Nuclear Energy and Engineering

### これを引用

*journal of nuclear science and technology*,

*30*(6), 573-578. https://doi.org/10.1080/18811248.1993.9734521

**Effect of timing non-linearity of position signal on the output of linear discharge type analogue charge division.** / Rashid, M. D.Mamunur; Iwamoto, Osamu; Nohtomi, Akihiro; Uozumi, Yusuke; Sakae, Takeji; Matoba, Masaru.

研究成果: ジャーナルへの寄稿 › 記事

*journal of nuclear science and technology*, 巻. 30, 番号 6, pp. 573-578. https://doi.org/10.1080/18811248.1993.9734521

}

TY - JOUR

T1 - Effect of timing non-linearity of position signal on the output of linear discharge type analogue charge division

AU - Rashid, M. D.Mamunur

AU - Iwamoto, Osamu

AU - Nohtomi, Akihiro

AU - Uozumi, Yusuke

AU - Sakae, Takeji

AU - Matoba, Masaru

PY - 1993/1/1

Y1 - 1993/1/1

N2 - Linear Discharge Type Analogue Charge Division is a method of determining the position of ionization in the Single Wire Position Sensitive Proportional Counter (SWPC). The division output is proportional to the position of ionization where the numerator input is the pulse (V1) taken from the one end of the anode and the denominator input is the sum of the pulses (V1+ V2) taken from both ends. There exists a difference between the timing of the peak of the numerator and denominator input pulses which varies with the position and shows a non-linear characteristic. As the peak-hold gate signal of the analogue charge division is obtained from the denominator input pulse, the effect is reflected on the output of the charge division. The timing non-linearity of the input signal and the ultimate position output non-linearity are estimated analytically. The effect is evaluated for various parameters, such as, the intrinsic time constant of SWPC, the shaping time constant and gate signal's delay etc. The position output for a 1.8m long (15µmф) SWPC has been obtained experimentally and the observed output non-linearity is presented and compared with the estimation.

AB - Linear Discharge Type Analogue Charge Division is a method of determining the position of ionization in the Single Wire Position Sensitive Proportional Counter (SWPC). The division output is proportional to the position of ionization where the numerator input is the pulse (V1) taken from the one end of the anode and the denominator input is the sum of the pulses (V1+ V2) taken from both ends. There exists a difference between the timing of the peak of the numerator and denominator input pulses which varies with the position and shows a non-linear characteristic. As the peak-hold gate signal of the analogue charge division is obtained from the denominator input pulse, the effect is reflected on the output of the charge division. The timing non-linearity of the input signal and the ultimate position output non-linearity are estimated analytically. The effect is evaluated for various parameters, such as, the intrinsic time constant of SWPC, the shaping time constant and gate signal's delay etc. The position output for a 1.8m long (15µmф) SWPC has been obtained experimentally and the observed output non-linearity is presented and compared with the estimation.

UR - http://www.scopus.com/inward/record.url?scp=0027606935&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027606935&partnerID=8YFLogxK

U2 - 10.1080/18811248.1993.9734521

DO - 10.1080/18811248.1993.9734521

M3 - Article

AN - SCOPUS:0027606935

VL - 30

SP - 573

EP - 578

JO - Journal of Nuclear Science and Technology

JF - Journal of Nuclear Science and Technology

SN - 0022-3131

IS - 6

ER -