Effective thermal conductivity of isotropic formed green carbon during carbonization process

Jun Fukai, Hisayuki Orita, Takayuki Nejime, Kazutaka Saruwatari, Osamu Miyatake

研究成果: Contribution to journalArticle査読

3 被引用数 (Scopus)

抄録

Temperature dependency of the effective thermal conductivity of isotropic formed green carbon during carbonization is estimated of the basis on that of packed green carbon before forming. The formed green carbon is regarded as a pouru material containing micropores. The packed green carbon during carbonization successively changes its structure from that of a packed bed of particles initially to that of porous body after going through that of a consolidated body. The thermal conductivity of gaseous tar, which is necessary to determine that of the gas phase, is obtained from physical properties of the gas species of which liquid tar is composed. Porosity of the specimen and molar fractions of the gases released by pyrolysis are experimentally determined. The effective thermal conductivity is measured by using the hot-wire method while the specimen is heated from room temperature to about 1000 K at a constant heating rate of 1 K/min. Estimated effective thermal conductivities for two kinds of formed green carbons agree well with the respective measured values over a wide range of temperature.

本文言語英語
ページ(範囲)435-446
ページ数12
ジャーナルHeat Transfer - Japanese Research
22
5
出版ステータス出版済み - 12 1 1993

All Science Journal Classification (ASJC) codes

  • 流体および伝熱

フィンガープリント

「Effective thermal conductivity of isotropic formed green carbon during carbonization process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル