Effects of 3D microstructural distribution on short crack growth behavior in two bimodal Ti–6Al–4V alloys

M. Hassanipour, S. Watanabe, K. Hirayama, H. Toda, K. Uesugi, A. Takeuchi

研究成果: Contribution to journalArticle査読

5 被引用数 (Scopus)

抄録

In situ X-ray micro-tomography was performed to analyze the short crack growth in the 3D microstructure of two bimodal Ti–6Al–4V alloys with predominant α+β and α phase volume fractions. Short crack strongly interacts with the local microstructure and it grows into the predominant phase above the average microstructural fraction in each alloy. The higher volume fraction and size of the α grains in the microstructure induce crack growth with lower variations and larger deflection lengths inside the α grains. As the short crack length increases, the larger deflections left behind the crack front induces higher crack closure that decreases the crack driving forces. As a result, the short crack remains sensitive to the local microstructural features at higher lengths.

本文言語英語
論文番号138264
ジャーナルMaterials Science and Engineering A
766
DOI
出版ステータス出版済み - 10 24 2019

All Science Journal Classification (ASJC) codes

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Effects of 3D microstructural distribution on short crack growth behavior in two bimodal Ti–6Al–4V alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル