The effect of microstructure on the residual stresses in directionally solidified eutectic (DSE) Al2O3/Y3Al5O12 (YAG) ceramic composite were investigated by X-ray diffraction technique and finite element method (FEM). In the X-ray stress measurement, the YAG skeleton derived from the Al2O3/YAG composite by dioxidation of the Al2O3 phase was used as a reference specimen without thermally-induced stress, and the X-ray stress measurements with CuKα1 irradiation were performed on the two faces of a cubic specimen, namely, the faces parallel and perpendicular to the solidification direction, respectively. On the other hand, a numerical analysis using finite element method (FEM) which represents the actual microstructure features of the experimental specimen was carried out in different local regions with different morphologies to reveal the effect of microstructure on the distribution of residual stress in the composite. The distributions of residual stresses in both constituting phases were mapped by FEM calculation. Meanwhile, the mapping of residual stress indicated that the distribution of residual stress in the interior of each phase was not homogeneous being dependent on the solidification direction and local morphologies of constituting phases such as curvature of interfaces, array and volume fraction. The experimentally measured residual stresses were accounted for by the FEM analysis.
|ホスト出版物のタイトル||Ceramic and Polymer Matrix Composites|
|ホスト出版物のサブタイトル||Properties, Performance and Applications|
|出版社||Nova Science Publishers, Inc.|
|出版ステータス||出版済み - 12 1 2010|
All Science Journal Classification (ASJC) codes