Effects of Specimen thickness in tensile tests on elongation and deformation energy for industrially pure iron

Yuji Takeda, Chatcharit Kiattisaksri, Masatoshi Aramaki, Shinji Munetoh, Osamu Furukimi

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

抄録

Industrial pure iron specimens with a thickness that varied from 0.2 to 2.0 mm were investigated in tensile tests to examine the influence of specimen thickness on the percentage elongation and deformation energy. Conventionally, the total percentage elongation of a tensile specimen can be converted by Oliver's equation, which is related to the tensile test specimen thickness. However, in this experiment, it was noticed that there were number of factors which led to the inaccuracy in the result. The total percentage elongation was influenced by the stress triaxiality. The FEM (Finite Element Method) analysis indicated that the stress triaxiality increased significantly with the thinner specimen. This was due to the void growth behavior, observed by SEM (Scanning Electron Microscope) under low voltage. These results revealed that voids nucleation and growth behavior influenced by the stress triaxiality were the main cause for the formula's incompatibility. After completing the tensile test, the stress-strain curve can be obtained and categorized into the uniform and local deformation. The uniform deformation energy did not depend on the specimen thickness in contrast to duplex stainless steel, which was examined in our previous research. On the other hand, the local deformation energy lowered with the decrease in specimen thickness as with duplex stainless steel. These results indicated that the void nucleation and growth behavior had a significant impact on the total percentage elongation.

元の言語英語
ページ(範囲)1129-1137
ページ数9
ジャーナルisij international
57
発行部数6
DOI
出版物ステータス出版済み - 1 1 2017

Fingerprint

Elongation
Iron
Stainless Steel
Nucleation
Stainless steel
Stress-strain curves
Electron microscopes
Scanning
Finite element method
Electric potential
Experiments

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

これを引用

Effects of Specimen thickness in tensile tests on elongation and deformation energy for industrially pure iron. / Takeda, Yuji; Kiattisaksri, Chatcharit; Aramaki, Masatoshi; Munetoh, Shinji; Furukimi, Osamu.

:: isij international, 巻 57, 番号 6, 01.01.2017, p. 1129-1137.

研究成果: ジャーナルへの寄稿記事

@article{e577ed73165843f5ae9ea94048125212,
title = "Effects of Specimen thickness in tensile tests on elongation and deformation energy for industrially pure iron",
abstract = "Industrial pure iron specimens with a thickness that varied from 0.2 to 2.0 mm were investigated in tensile tests to examine the influence of specimen thickness on the percentage elongation and deformation energy. Conventionally, the total percentage elongation of a tensile specimen can be converted by Oliver's equation, which is related to the tensile test specimen thickness. However, in this experiment, it was noticed that there were number of factors which led to the inaccuracy in the result. The total percentage elongation was influenced by the stress triaxiality. The FEM (Finite Element Method) analysis indicated that the stress triaxiality increased significantly with the thinner specimen. This was due to the void growth behavior, observed by SEM (Scanning Electron Microscope) under low voltage. These results revealed that voids nucleation and growth behavior influenced by the stress triaxiality were the main cause for the formula's incompatibility. After completing the tensile test, the stress-strain curve can be obtained and categorized into the uniform and local deformation. The uniform deformation energy did not depend on the specimen thickness in contrast to duplex stainless steel, which was examined in our previous research. On the other hand, the local deformation energy lowered with the decrease in specimen thickness as with duplex stainless steel. These results indicated that the void nucleation and growth behavior had a significant impact on the total percentage elongation.",
author = "Yuji Takeda and Chatcharit Kiattisaksri and Masatoshi Aramaki and Shinji Munetoh and Osamu Furukimi",
year = "2017",
month = "1",
day = "1",
doi = "10.2355/isijinternational.ISIJINT-2016-555",
language = "English",
volume = "57",
pages = "1129--1137",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "6",

}

TY - JOUR

T1 - Effects of Specimen thickness in tensile tests on elongation and deformation energy for industrially pure iron

AU - Takeda, Yuji

AU - Kiattisaksri, Chatcharit

AU - Aramaki, Masatoshi

AU - Munetoh, Shinji

AU - Furukimi, Osamu

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Industrial pure iron specimens with a thickness that varied from 0.2 to 2.0 mm were investigated in tensile tests to examine the influence of specimen thickness on the percentage elongation and deformation energy. Conventionally, the total percentage elongation of a tensile specimen can be converted by Oliver's equation, which is related to the tensile test specimen thickness. However, in this experiment, it was noticed that there were number of factors which led to the inaccuracy in the result. The total percentage elongation was influenced by the stress triaxiality. The FEM (Finite Element Method) analysis indicated that the stress triaxiality increased significantly with the thinner specimen. This was due to the void growth behavior, observed by SEM (Scanning Electron Microscope) under low voltage. These results revealed that voids nucleation and growth behavior influenced by the stress triaxiality were the main cause for the formula's incompatibility. After completing the tensile test, the stress-strain curve can be obtained and categorized into the uniform and local deformation. The uniform deformation energy did not depend on the specimen thickness in contrast to duplex stainless steel, which was examined in our previous research. On the other hand, the local deformation energy lowered with the decrease in specimen thickness as with duplex stainless steel. These results indicated that the void nucleation and growth behavior had a significant impact on the total percentage elongation.

AB - Industrial pure iron specimens with a thickness that varied from 0.2 to 2.0 mm were investigated in tensile tests to examine the influence of specimen thickness on the percentage elongation and deformation energy. Conventionally, the total percentage elongation of a tensile specimen can be converted by Oliver's equation, which is related to the tensile test specimen thickness. However, in this experiment, it was noticed that there were number of factors which led to the inaccuracy in the result. The total percentage elongation was influenced by the stress triaxiality. The FEM (Finite Element Method) analysis indicated that the stress triaxiality increased significantly with the thinner specimen. This was due to the void growth behavior, observed by SEM (Scanning Electron Microscope) under low voltage. These results revealed that voids nucleation and growth behavior influenced by the stress triaxiality were the main cause for the formula's incompatibility. After completing the tensile test, the stress-strain curve can be obtained and categorized into the uniform and local deformation. The uniform deformation energy did not depend on the specimen thickness in contrast to duplex stainless steel, which was examined in our previous research. On the other hand, the local deformation energy lowered with the decrease in specimen thickness as with duplex stainless steel. These results indicated that the void nucleation and growth behavior had a significant impact on the total percentage elongation.

UR - http://www.scopus.com/inward/record.url?scp=85020863061&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020863061&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.ISIJINT-2016-555

DO - 10.2355/isijinternational.ISIJINT-2016-555

M3 - Article

VL - 57

SP - 1129

EP - 1137

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 6

ER -