Appropriate setting time is an important parameter that determines the effectiveness of apatite cement (AC) for clinical application, given the issues of crystalline inflammatory response phenomena if AC fails to set. To this end, the present study analyzes the effects of the method of apatite seed crystals addition on the setting reaction of α-tricalcium phosphate (α-TCP) based AC. Two ACs, both consisting of α-TCP and calcium deficient hydroxyapatite (cdHAp), were analyzed in this study. In one AC, cdHAp was added externally to α-TCP and this AC was abbreviated as AC(EA). In the other AC, α-TCP was partially hydrolyzed to form cdHAp on the surface of α-TCP. This AC was referred to as AC(PH). Results indicate a decrease in the setting time of both ACs with the addition of cdHAp. Among them, for the given amount of added cdHAp, AC(PH) showed relatively shorter setting time than AC(EA). Besides, the mechanical strength of the set AC(PH) was also higher than that of set AC(EA). These properties of AC(PH) were attributed to the predominant crystal growth of cdHAp in the vicinity of the α-TCP particle surface. Accordingly, it can be concluded that the partial hydrolysis of α-TCP may be a better approach to add low crystalline cdHAp onto α-TCP based AC.
|ジャーナル||Journal of Materials Science: Materials in Medicine|
|出版ステータス||出版済み - 10 1 2015|
All Science Journal Classification (ASJC) codes