Effects of ultrasonic vibration on machining accuracy in microdrilling

Hiromichi Onikura, Osamu Ohnishi, Jinhai Feng, Toshikazu Kanda, Takahiro Morita

    研究成果: ジャーナルへの寄稿学術誌査読

    17 被引用数 (Scopus)

    抄録

    The purposes of the present paper are to investigate the effects of ultrasonic vibration on machining accuracy of duralumin and to make clear the mechanisms for the improvement of machining accuracy in microdrilling. Ultrasonic vibration of 40 kHz considerably reduces the friction on the rake face, makes chips thinner and then decreases cutting forces. This decrease in cutting forces, especially the variation of the mean radial force, leads to the improvement of cutting accuracy, i. e., smaller hole oversize, a little better roundness at hole entrance, smaller displacement of hole center with ultrasonic vibration. The thin chip increases the velocity of chip flow, and results in better characteristics of chip disposal and less tendency of drill breakage.

    本文言語英語
    ページ(範囲)676-680
    ページ数5
    ジャーナルSeimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
    62
    5
    DOI
    出版ステータス出版済み - 5月 1996

    !!!All Science Journal Classification (ASJC) codes

    • 機械工学

    フィンガープリント

    「Effects of ultrasonic vibration on machining accuracy in microdrilling」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル