Electrodeposition of Zn-Zr oxide composite from dispersed-particle-free solution

Hiroaki Nakano, Yosuke Hara, Satoshi Oue, Shigeo Kobayashi

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

抄録

Electrodeposition of Zn-Zr oxide composite from an unagitated sulfate solution containing Zn2+ and Zr ions was investigated at pH 1-2 and at 313 K under galvanostatic conditions. The Zr content was higher in deposits formed from the solution at pH 2 than in those formed from the solution at pH 1 and initially decreased with increasing current density; however, when the current density was increased further, the Zr content in the deposits increased. This increase in Zr content was attributed to the acceleration of the hydrolysis of Zr ions by an increase in hydrogen evolution in the solution in the vicinity of cathode. In solutions containing Zr ions, Zn deposition was substantially polarized because of the electric resistance of film of the Zr oxide formed by the hydrolysis of Zr ions. The pH in the vicinity of the cathode, as measured using an Sb microelectrode, was approximately 2.2, which is similar to the critical pH for the formation of ZrO2. Scanning electron microscopy and energy-dispersive X-ray spectroscopy point analysis of the deposits revealed that granular Zr oxide was deposited at the surfaces of the Zn platelet crystals and in the voids between the crystals. Polarization curves in 3 mass% NaCl solution revealed that the corrosion potential of the deposited Zn-1.1 mass% Zr oxide films was more noble than that of Zn films and that the corrosion current density of the Zn-1.1 mass% Zr oxide films was lower than that of Zn films.

元の言語英語
ページ(範囲)1165-1170
ページ数6
ジャーナルMaterials Transactions
57
発行部数7
DOI
出版物ステータス出版済み - 1 1 2016

Fingerprint

Electrodeposition
electrodeposition
Oxides
composite materials
oxides
Composite materials
Ions
Current density
Deposits
deposits
current density
Oxide films
oxide films
hydrolysis
Hydrolysis
corrosion
ions
Cathodes
cathodes
Corrosion

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

これを引用

Electrodeposition of Zn-Zr oxide composite from dispersed-particle-free solution. / Nakano, Hiroaki; Hara, Yosuke; Oue, Satoshi; Kobayashi, Shigeo.

:: Materials Transactions, 巻 57, 番号 7, 01.01.2016, p. 1165-1170.

研究成果: ジャーナルへの寄稿記事

@article{64bf0cfd6dd6430c8dbcffa0b2daed9b,
title = "Electrodeposition of Zn-Zr oxide composite from dispersed-particle-free solution",
abstract = "Electrodeposition of Zn-Zr oxide composite from an unagitated sulfate solution containing Zn2+ and Zr ions was investigated at pH 1-2 and at 313 K under galvanostatic conditions. The Zr content was higher in deposits formed from the solution at pH 2 than in those formed from the solution at pH 1 and initially decreased with increasing current density; however, when the current density was increased further, the Zr content in the deposits increased. This increase in Zr content was attributed to the acceleration of the hydrolysis of Zr ions by an increase in hydrogen evolution in the solution in the vicinity of cathode. In solutions containing Zr ions, Zn deposition was substantially polarized because of the electric resistance of film of the Zr oxide formed by the hydrolysis of Zr ions. The pH in the vicinity of the cathode, as measured using an Sb microelectrode, was approximately 2.2, which is similar to the critical pH for the formation of ZrO2. Scanning electron microscopy and energy-dispersive X-ray spectroscopy point analysis of the deposits revealed that granular Zr oxide was deposited at the surfaces of the Zn platelet crystals and in the voids between the crystals. Polarization curves in 3 mass{\%} NaCl solution revealed that the corrosion potential of the deposited Zn-1.1 mass{\%} Zr oxide films was more noble than that of Zn films and that the corrosion current density of the Zn-1.1 mass{\%} Zr oxide films was lower than that of Zn films.",
author = "Hiroaki Nakano and Yosuke Hara and Satoshi Oue and Shigeo Kobayashi",
year = "2016",
month = "1",
day = "1",
doi = "10.2320/matertrans.M2016084",
language = "English",
volume = "57",
pages = "1165--1170",
journal = "Materials Transactions",
issn = "0916-1821",
publisher = "The Japan Institute of Metals and Materials",
number = "7",

}

TY - JOUR

T1 - Electrodeposition of Zn-Zr oxide composite from dispersed-particle-free solution

AU - Nakano, Hiroaki

AU - Hara, Yosuke

AU - Oue, Satoshi

AU - Kobayashi, Shigeo

PY - 2016/1/1

Y1 - 2016/1/1

N2 - Electrodeposition of Zn-Zr oxide composite from an unagitated sulfate solution containing Zn2+ and Zr ions was investigated at pH 1-2 and at 313 K under galvanostatic conditions. The Zr content was higher in deposits formed from the solution at pH 2 than in those formed from the solution at pH 1 and initially decreased with increasing current density; however, when the current density was increased further, the Zr content in the deposits increased. This increase in Zr content was attributed to the acceleration of the hydrolysis of Zr ions by an increase in hydrogen evolution in the solution in the vicinity of cathode. In solutions containing Zr ions, Zn deposition was substantially polarized because of the electric resistance of film of the Zr oxide formed by the hydrolysis of Zr ions. The pH in the vicinity of the cathode, as measured using an Sb microelectrode, was approximately 2.2, which is similar to the critical pH for the formation of ZrO2. Scanning electron microscopy and energy-dispersive X-ray spectroscopy point analysis of the deposits revealed that granular Zr oxide was deposited at the surfaces of the Zn platelet crystals and in the voids between the crystals. Polarization curves in 3 mass% NaCl solution revealed that the corrosion potential of the deposited Zn-1.1 mass% Zr oxide films was more noble than that of Zn films and that the corrosion current density of the Zn-1.1 mass% Zr oxide films was lower than that of Zn films.

AB - Electrodeposition of Zn-Zr oxide composite from an unagitated sulfate solution containing Zn2+ and Zr ions was investigated at pH 1-2 and at 313 K under galvanostatic conditions. The Zr content was higher in deposits formed from the solution at pH 2 than in those formed from the solution at pH 1 and initially decreased with increasing current density; however, when the current density was increased further, the Zr content in the deposits increased. This increase in Zr content was attributed to the acceleration of the hydrolysis of Zr ions by an increase in hydrogen evolution in the solution in the vicinity of cathode. In solutions containing Zr ions, Zn deposition was substantially polarized because of the electric resistance of film of the Zr oxide formed by the hydrolysis of Zr ions. The pH in the vicinity of the cathode, as measured using an Sb microelectrode, was approximately 2.2, which is similar to the critical pH for the formation of ZrO2. Scanning electron microscopy and energy-dispersive X-ray spectroscopy point analysis of the deposits revealed that granular Zr oxide was deposited at the surfaces of the Zn platelet crystals and in the voids between the crystals. Polarization curves in 3 mass% NaCl solution revealed that the corrosion potential of the deposited Zn-1.1 mass% Zr oxide films was more noble than that of Zn films and that the corrosion current density of the Zn-1.1 mass% Zr oxide films was lower than that of Zn films.

UR - http://www.scopus.com/inward/record.url?scp=84978402699&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84978402699&partnerID=8YFLogxK

U2 - 10.2320/matertrans.M2016084

DO - 10.2320/matertrans.M2016084

M3 - Article

VL - 57

SP - 1165

EP - 1170

JO - Materials Transactions

JF - Materials Transactions

SN - 0916-1821

IS - 7

ER -