Electron microscopy studies of twin morphologies in B19′ martensite in the Ti-Ni shape memory alloy

Minoru Nishida, H. Ohgi, I. Itai, A. Chiba, K. Yamauchi

研究成果: ジャーナルへの寄稿記事

110 引用 (Scopus)

抄録

Twins in the B19′ martensite in the Ti-Ni shape memory alloy have been investigated by conventional transmission electron microscopy (CTEM) and electron diffraction. The following five twinning modes were observed. The 〈011〉 Type II twin was dominantly observed among those and confirmed to be a lattice invariant shear since most martensite variants consisted of the 〈011〉 Type II twinning. The {111-} Type I twinning was morphologically and characteristically divided into three types, i.e. a deformation twin, a variant accommodation twin and a lattice invariant shear. (100) and (001) compound twinnings were considered to be a deformation twin. The 011 Type I twinning was inevitably reconfirmed and considered to be a lattice invariant shear rather than a deformation twin since it extended over the whole martensite plate. The formation order and mechanism of each twinning mode were qualitatively discussed in view of the elastic interaction accumulated during the martensitic transformation.

元の言語英語
ページ(範囲)1219-1227
ページ数9
ジャーナルActa Metallurgica Et Materialia
43
発行部数3
DOI
出版物ステータス出版済み - 1 1 1995
外部発表Yes

Fingerprint

Twinning
Shape memory effect
Martensite
Electron microscopy
Martensitic transformations
Electron diffraction
titanium nickelide
Transmission electron microscopy

All Science Journal Classification (ASJC) codes

  • Engineering(all)

これを引用

Electron microscopy studies of twin morphologies in B19′ martensite in the Ti-Ni shape memory alloy. / Nishida, Minoru; Ohgi, H.; Itai, I.; Chiba, A.; Yamauchi, K.

:: Acta Metallurgica Et Materialia, 巻 43, 番号 3, 01.01.1995, p. 1219-1227.

研究成果: ジャーナルへの寄稿記事

Nishida, Minoru ; Ohgi, H. ; Itai, I. ; Chiba, A. ; Yamauchi, K. / Electron microscopy studies of twin morphologies in B19′ martensite in the Ti-Ni shape memory alloy. :: Acta Metallurgica Et Materialia. 1995 ; 巻 43, 番号 3. pp. 1219-1227.
@article{b34db21cb3494db5bb91f127d5c2ba76,
title = "Electron microscopy studies of twin morphologies in B19′ martensite in the Ti-Ni shape memory alloy",
abstract = "Twins in the B19′ martensite in the Ti-Ni shape memory alloy have been investigated by conventional transmission electron microscopy (CTEM) and electron diffraction. The following five twinning modes were observed. The 〈011〉 Type II twin was dominantly observed among those and confirmed to be a lattice invariant shear since most martensite variants consisted of the 〈011〉 Type II twinning. The {111-} Type I twinning was morphologically and characteristically divided into three types, i.e. a deformation twin, a variant accommodation twin and a lattice invariant shear. (100) and (001) compound twinnings were considered to be a deformation twin. The 011 Type I twinning was inevitably reconfirmed and considered to be a lattice invariant shear rather than a deformation twin since it extended over the whole martensite plate. The formation order and mechanism of each twinning mode were qualitatively discussed in view of the elastic interaction accumulated during the martensitic transformation.",
author = "Minoru Nishida and H. Ohgi and I. Itai and A. Chiba and K. Yamauchi",
year = "1995",
month = "1",
day = "1",
doi = "10.1016/0956-7151(94)00332-C",
language = "English",
volume = "43",
pages = "1219--1227",
journal = "Acta Materialia",
issn = "1359-6454",
publisher = "Elsevier Limited",
number = "3",

}

TY - JOUR

T1 - Electron microscopy studies of twin morphologies in B19′ martensite in the Ti-Ni shape memory alloy

AU - Nishida, Minoru

AU - Ohgi, H.

AU - Itai, I.

AU - Chiba, A.

AU - Yamauchi, K.

PY - 1995/1/1

Y1 - 1995/1/1

N2 - Twins in the B19′ martensite in the Ti-Ni shape memory alloy have been investigated by conventional transmission electron microscopy (CTEM) and electron diffraction. The following five twinning modes were observed. The 〈011〉 Type II twin was dominantly observed among those and confirmed to be a lattice invariant shear since most martensite variants consisted of the 〈011〉 Type II twinning. The {111-} Type I twinning was morphologically and characteristically divided into three types, i.e. a deformation twin, a variant accommodation twin and a lattice invariant shear. (100) and (001) compound twinnings were considered to be a deformation twin. The 011 Type I twinning was inevitably reconfirmed and considered to be a lattice invariant shear rather than a deformation twin since it extended over the whole martensite plate. The formation order and mechanism of each twinning mode were qualitatively discussed in view of the elastic interaction accumulated during the martensitic transformation.

AB - Twins in the B19′ martensite in the Ti-Ni shape memory alloy have been investigated by conventional transmission electron microscopy (CTEM) and electron diffraction. The following five twinning modes were observed. The 〈011〉 Type II twin was dominantly observed among those and confirmed to be a lattice invariant shear since most martensite variants consisted of the 〈011〉 Type II twinning. The {111-} Type I twinning was morphologically and characteristically divided into three types, i.e. a deformation twin, a variant accommodation twin and a lattice invariant shear. (100) and (001) compound twinnings were considered to be a deformation twin. The 011 Type I twinning was inevitably reconfirmed and considered to be a lattice invariant shear rather than a deformation twin since it extended over the whole martensite plate. The formation order and mechanism of each twinning mode were qualitatively discussed in view of the elastic interaction accumulated during the martensitic transformation.

UR - http://www.scopus.com/inward/record.url?scp=0029273487&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029273487&partnerID=8YFLogxK

U2 - 10.1016/0956-7151(94)00332-C

DO - 10.1016/0956-7151(94)00332-C

M3 - Article

AN - SCOPUS:0029273487

VL - 43

SP - 1219

EP - 1227

JO - Acta Materialia

JF - Acta Materialia

SN - 1359-6454

IS - 3

ER -