Encapsulation of a powdery spinel-type Li+ ion sieve derived from biogenic manganese oxide in alginate beads

Paulmanickam Koilraj, Siwaporn Meejoo Smith, Qianqian Yu, Sarah Ulrich, Keiko Sasaki

研究成果: Contribution to journalArticle査読

9 被引用数 (Scopus)

抄録

A powdery lithium ion sieve (HMO) derived from biogenic birnessite was homogeneously integrated in sodium alginate (AL) beads. The composite beads were then characterized and their Li+ adsorption properties were investigated. Scanning electron microscopy–energy dispersive spectroscopy analysis showed that the HMO particles were homogeneously dispersed in the AL beads even after drying. The adsorption isotherm of Li+ adsorption to HMO encapsulated in AL beads (HMO–AL) was well fitted by the linear Langmuir model, and the beads showed a maximum adsorption capacity of 3.61 mmol/g based on HMO, which is comparable with the value of the original powdery HMO. Kinetic studies revealed that adsorption of Li+ follows a pseudo-second-order model with rate constant k2 = 2.8–11.9 × 10− 3 g/(mmol min) for the initial Li+ concentration range 2.56–4.23 mM. Diffusion of Li+ from aqueous solution to the HMO particle through the Ca–AL network is the rate-limiting step for Li+ adsorption to HMO–AL beads. The HMO-AL beads enhanced the handling efficiency for Li+ adsorption and reused without significant reduction of Li+ adsorption efficacy.

本文言語英語
ページ(範囲)1201-1207
ページ数7
ジャーナルPowder Technology
301
DOI
出版ステータス出版済み - 11 1 2016

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)

フィンガープリント 「Encapsulation of a powdery spinel-type Li<sup>+</sup> ion sieve derived from biogenic manganese oxide in alginate beads」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル