Engineering design of the Mini-RT device

Toshiyuki Mito, Nagato Yanagi, Yoshimitsu Hishinuma, Yuichi Ogawa, Junji Morikawa, Kotaro Ohkuni, Masataka Iwakuma, Toshio Uede, Shinichi Nose, Ikuo Itoh, Shigeo Fukui

研究成果: Contribution to journalConference article

11 引用 (Scopus)


The plasma experiment apparatus S-RT (Superconducting Ring Trap) is planned for the purpose of high beta plasma confinement research in the University of Tokyo. As a preceding step, Mini-RT, which is the size reduction version of S-RT, has been constructed as a joint research of NIFS, the University of Tokyo, and Kyushu University. In this experiment a magnetic-levitation coil (floating coil) operated in persistent current mode has to levitate for 8 hours in the plasma vacuum vessel. The HTS floating coil wound with a Bi-2223 tape has a diameter of 300 mm and an electromotive force of 50 kA. Since any refrigerant cannot be fed to the coil during the plasma experiment, the coil is designed so that the temperature rise after 8 hours of levitation is less than 40 K with the specific heat of the coil and radiation shield. At the end of the daily plasma experiment, the coil will be drawn down to the maintenance location at the bottom of the plasma vacuum vessel, and it will be re-cooled to 20 K.

ジャーナルIEEE Transactions on Applied Superconductivity
発行部数2 II
出版物ステータス出版済み - 6 1 2003
イベント2002 Applied Superconductivity Conference - Houston, TX, 米国
継続期間: 8 4 20028 9 2002

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

フィンガープリント Engineering design of the Mini-RT device' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Mito, T., Yanagi, N., Hishinuma, Y., Ogawa, Y., Morikawa, J., Ohkuni, K., Iwakuma, M., Uede, T., Nose, S., Itoh, I., & Fukui, S. (2003). Engineering design of the Mini-RT device. IEEE Transactions on Applied Superconductivity, 13(2 II), 1500-1503.