Enhanced Jc properties in superconducting NbTi composites by introducing Nb artificial pins with a layered structure

Kaname Matsumoto; Hirokazu Takewaki; Yasuzo Tanaka; Osuke Miura; Kaoru Yamafuji; Kazuo Funaki; Masataka Iwakuma; Teruo Matsushita

doi:10.1063/1.110896

Enhanced J_c properties in superconducting NbTi composites by introducing Nb artificial pins with a layered structure

Kaname Matsumoto, Hirokazu Takewaki, Yasuzo Tanaka, Osuke Miura, Kaoru Yamafuji, Kazuo Funaki, Masataka Iwakuma, Teruo Matsushita

エネルギー応用システム工学

研究成果: Contribution to journal › Article › 査読

38 被引用数 (Scopus)

抄録

High critical current densities (4250 A/mm² at 5 T, 4.2 K, and 15 000 A/mm² at 2 T, 4.2 K) were achieved by using an artificially designed pin structure composed of randomly oriented clusters of Nb/NbTi multilayer in a NbTi composite superconductor (with a round cross section). The maximum values were obtained when the Nb layer thickness was designed to be approximately twice the coherence length in NbTi, where the layer thickness is five to ten times thicker than that of the optimized α-Ti ribbon thickness in a conventional NbTi system.

本文言語	英語
ページ（範囲）	115-117
ページ数	3
ジャーナル	Applied Physics Letters
巻	64
号	1
DOI	https://doi.org/10.1063/1.110896
出版ステータス	出版済み - 12 1 1994

All Science Journal Classification (ASJC) codes

Physics and Astronomy (miscellaneous)

文献へのアクセス

10.1063/1.110896

フィンガープリント「Enhanced J<sub>c</sub> properties in superconducting NbTi composites by introducing Nb artificial pins with a layered structure」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

Enhanced J_c properties in superconducting NbTi composites by introducing Nb artificial pins with a layered structure. / Matsumoto, Kaname; Takewaki, Hirokazu; Tanaka, Yasuzo; Miura, Osuke; Yamafuji, Kaoru; Funaki, Kazuo; Iwakuma, Masataka; Matsushita, Teruo.

In: Applied Physics Letters, Vol. 64, No. 1, 01.12.1994, p. 115-117.

研究成果: Contribution to journal › Article › 査読

@article{0d1cb9c0ad9f41c4aeda64b7dc771c2c,

title = "Enhanced Jc properties in superconducting NbTi composites by introducing Nb artificial pins with a layered structure",

abstract = "High critical current densities (4250 A/mm2 at 5 T, 4.2 K, and 15 000 A/mm2 at 2 T, 4.2 K) were achieved by using an artificially designed pin structure composed of randomly oriented clusters of Nb/NbTi multilayer in a NbTi composite superconductor (with a round cross section). The maximum values were obtained when the Nb layer thickness was designed to be approximately twice the coherence length in NbTi, where the layer thickness is five to ten times thicker than that of the optimized α-Ti ribbon thickness in a conventional NbTi system.",

author = "Kaname Matsumoto and Hirokazu Takewaki and Yasuzo Tanaka and Osuke Miura and Kaoru Yamafuji and Kazuo Funaki and Masataka Iwakuma and Teruo Matsushita",

year = "1994",

month = dec,

day = "1",

doi = "10.1063/1.110896",

language = "English",

volume = "64",

pages = "115--117",

journal = "Applied Physics Letters",

issn = "0003-6951",

publisher = "American Institute of Physics Publising LLC",

number = "1",

}

TY - JOUR

T1 - Enhanced Jc properties in superconducting NbTi composites by introducing Nb artificial pins with a layered structure

AU - Matsumoto, Kaname

AU - Takewaki, Hirokazu

AU - Tanaka, Yasuzo

AU - Miura, Osuke

AU - Yamafuji, Kaoru

AU - Funaki, Kazuo

AU - Iwakuma, Masataka

AU - Matsushita, Teruo

PY - 1994/12/1

Y1 - 1994/12/1

N2 - High critical current densities (4250 A/mm2 at 5 T, 4.2 K, and 15 000 A/mm2 at 2 T, 4.2 K) were achieved by using an artificially designed pin structure composed of randomly oriented clusters of Nb/NbTi multilayer in a NbTi composite superconductor (with a round cross section). The maximum values were obtained when the Nb layer thickness was designed to be approximately twice the coherence length in NbTi, where the layer thickness is five to ten times thicker than that of the optimized α-Ti ribbon thickness in a conventional NbTi system.

AB - High critical current densities (4250 A/mm2 at 5 T, 4.2 K, and 15 000 A/mm2 at 2 T, 4.2 K) were achieved by using an artificially designed pin structure composed of randomly oriented clusters of Nb/NbTi multilayer in a NbTi composite superconductor (with a round cross section). The maximum values were obtained when the Nb layer thickness was designed to be approximately twice the coherence length in NbTi, where the layer thickness is five to ten times thicker than that of the optimized α-Ti ribbon thickness in a conventional NbTi system.

UR - http://www.scopus.com/inward/record.url?scp=0002755280&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0002755280&partnerID=8YFLogxK

U2 - 10.1063/1.110896

DO - 10.1063/1.110896

M3 - Article

AN - SCOPUS:0002755280

VL - 64

SP - 115

EP - 117

JO - Applied Physics Letters

JF - Applied Physics Letters

SN - 0003-6951

IS - 1

ER -