Enhanced targeting in breast tissue using a robotic tissue preloading-based needle insertion system

Yo Kobayashi, Makiko Suzuki, Atsushi Kato, Maya Hatano, Kozo Konishi, Makoto Hashizume, Masakatsu G. Fujie

研究成果: Contribution to journalArticle査読

22 被引用数 (Scopus)

抄録

The use of minimally invasive procedures for breast tumor diagnosis and treatment, such as needle biopsy and radiofrequency ablation (RFA), is steadily increasing. Accurate needle insertion requires solving the problems of tissue deformation and target displacement. In this study, we developed a robotic needle insertion method to improve the precision of diagnostic biopsy and RFA treatment. The mechanical probe was designed to reduce tissue displacement by pressing the breast tissue before needle insertion: a technique that is known as preloading. We focused on the needle insertion phase and evaluated the insertion accuracy achieved. Using a numerical simulation model and an actual hog breast, we compared tissue preloaded needle insertion with normal needle insertion. The data obtained with both test systems showed that targeting errors were greatly reduced using preloading-based needle insertion, as compared with normal needle insertion. The procedure is expected to offer a safe and effective alternative to the traditional methods of needle insertion for breast tissue biopsy or RFA. Our study also revealed the relationship between insertion accuracy and preloading probe force.

本文言語英語
論文番号6144750
ページ(範囲)710-722
ページ数13
ジャーナルIEEE Transactions on Robotics
28
3
DOI
出版ステータス出版済み - 2012

All Science Journal Classification (ASJC) codes

  • 制御およびシステム工学
  • コンピュータ サイエンスの応用
  • 電子工学および電気工学

フィンガープリント

「Enhanced targeting in breast tissue using a robotic tissue preloading-based needle insertion system」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル