Estimation method of spray diameter and size distribution based on energy conservation law

Chihiro Inoue, Toshinori Watanabe, Takehiro Himeno, Mitsuo Koshi

研究成果: Contribution to journalArticle査読

4 被引用数 (Scopus)

抄録

An analytical method was proposed and validated for droplet diameters and size distributions. The method was developed based on the energy conservation law including surface free energy and Laplace pressure. Under several hypotheses, the law derived an equation indicating that atomization resulted from a kinetic energy loss. Thus, once the amount of loss was obtained, the droplet diameter was able to be calculated without any experimental parameters. When the effects of ambient gas were ignorable, injection velocity profiles of liquid jets were the essential factor for the reduction of kinetic energy. The minimum Sauter mean diameter produced by liquid sheet atomization was inversely proportional to the injection Weber number under the conditions of injection velocity profiles with laminar or turbulent. By applying the mean diameter model, a non dimensional distribution function was also derived assuming Nukiyama-Tanasawa's function. The validity of these estimation methods were favorably confirmed by comparisons with corresponding mean diameters and the size distributions, which were experimentally measured under atmospheric pressure.

本文言語英語
ページ(範囲)850-861
ページ数12
ジャーナルNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
78
788
DOI
出版ステータス出版済み - 2012
外部発表はい

All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「Estimation method of spray diameter and size distribution based on energy conservation law」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル