Estimation method of the distance between the sensor and the sample in local current distribution measurement in superconducting tape based on scanning hall-probe microscopy

Kei Shiohara, Keitaro Okumura, Kohei Higashikawa, Takanobu Kiss

研究成果: ジャーナルへの寄稿記事

抄録

Scanning Hall-probe microscopy is a very powerful technique for the characterization of local properties in superconducting tape. On the other hand, the quantitative results can only be obtained with a known distance between the Hall-sensor and the sample. In this study we have proposed an estimation method of such a distance without any gap sensor. Considering the boundary condition that current should be zero outside of the sample, we have succeeded in estimating such a distance only from a measured distribution of magnetic field. This method will be a key technology for the characterization of long superconducting tapes by reel-to-reel magnetic microscopy where there would be some possibility of fluctuation of the distance due to vibration at a high-speed measurement.

元の言語英語
ページ(範囲)19-24
ページ数6
ジャーナルResearch Reports on Information Science and Electrical Engineering of Kyushu University
18
発行部数1
出版物ステータス出版済み - 1 1 2013

Fingerprint

Superconducting tapes
Microscopic examination
Scanning
Sensors
Boundary conditions
Magnetic fields

All Science Journal Classification (ASJC) codes

  • Computer Science(all)
  • Electrical and Electronic Engineering

これを引用

@article{9ca81ae2cba648eb9c9bb7fb5f620dcc,
title = "Estimation method of the distance between the sensor and the sample in local current distribution measurement in superconducting tape based on scanning hall-probe microscopy",
abstract = "Scanning Hall-probe microscopy is a very powerful technique for the characterization of local properties in superconducting tape. On the other hand, the quantitative results can only be obtained with a known distance between the Hall-sensor and the sample. In this study we have proposed an estimation method of such a distance without any gap sensor. Considering the boundary condition that current should be zero outside of the sample, we have succeeded in estimating such a distance only from a measured distribution of magnetic field. This method will be a key technology for the characterization of long superconducting tapes by reel-to-reel magnetic microscopy where there would be some possibility of fluctuation of the distance due to vibration at a high-speed measurement.",
author = "Kei Shiohara and Keitaro Okumura and Kohei Higashikawa and Takanobu Kiss",
year = "2013",
month = "1",
day = "1",
language = "English",
volume = "18",
pages = "19--24",
journal = "Research Reports on Information Science and Electrical Engineering of Kyushu University",
issn = "1342-3819",
publisher = "Kyushu University, Faculty of Science",
number = "1",

}

TY - JOUR

T1 - Estimation method of the distance between the sensor and the sample in local current distribution measurement in superconducting tape based on scanning hall-probe microscopy

AU - Shiohara, Kei

AU - Okumura, Keitaro

AU - Higashikawa, Kohei

AU - Kiss, Takanobu

PY - 2013/1/1

Y1 - 2013/1/1

N2 - Scanning Hall-probe microscopy is a very powerful technique for the characterization of local properties in superconducting tape. On the other hand, the quantitative results can only be obtained with a known distance between the Hall-sensor and the sample. In this study we have proposed an estimation method of such a distance without any gap sensor. Considering the boundary condition that current should be zero outside of the sample, we have succeeded in estimating such a distance only from a measured distribution of magnetic field. This method will be a key technology for the characterization of long superconducting tapes by reel-to-reel magnetic microscopy where there would be some possibility of fluctuation of the distance due to vibration at a high-speed measurement.

AB - Scanning Hall-probe microscopy is a very powerful technique for the characterization of local properties in superconducting tape. On the other hand, the quantitative results can only be obtained with a known distance between the Hall-sensor and the sample. In this study we have proposed an estimation method of such a distance without any gap sensor. Considering the boundary condition that current should be zero outside of the sample, we have succeeded in estimating such a distance only from a measured distribution of magnetic field. This method will be a key technology for the characterization of long superconducting tapes by reel-to-reel magnetic microscopy where there would be some possibility of fluctuation of the distance due to vibration at a high-speed measurement.

UR - http://www.scopus.com/inward/record.url?scp=84904545384&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84904545384&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84904545384

VL - 18

SP - 19

EP - 24

JO - Research Reports on Information Science and Electrical Engineering of Kyushu University

JF - Research Reports on Information Science and Electrical Engineering of Kyushu University

SN - 1342-3819

IS - 1

ER -