EStimation of critical pressure of decompression failure of epdm composites for sealing under high-pressure hydrogen gas

J. Yamabe, Shin Nishimura

研究成果: 会議への寄与タイプ論文

1 引用 (Scopus)

抄録

To clarify the relationship between the decompression failure behaviours of EPDM and the nature of their reinforcement fillers, EPDM composites were exposed to hydrogen gas at 30 °C and up to 10 MPa. Optical microscopic studies of the interiors of composites showed that cracks initiated as a result of stress concentrations from micrometre-sized bubbles formed by supersaturated hydrogen after decompression. The critical pressure (pFat which no cracks initiated after decompression was determined. Each bubble was regarded as a disc-like cavity with an internal pressure, and its tearing energy (Twas calculated by the finite-element method. The critical inner pressure (II Fwas then calculated on the basis of the criterion that T ≫; Ts,th (the threshold tearing energy for a static crack. The critical hydrogen pressures of unfilled and silica-filled EPDM could be successfully estimated because pF ∼ IIF. However, for the carbon black-filled composite (CBP the value of IIF was about twice that of pF. It is considered that the internal pressure of bubbles (IIbecame higher than the applied pressure of hydrogen (pin terms of absorbed hydrogen on carbon black in CBP, unlike unfilled or silica-filled composites.

元の言語英語
出版物ステータス出版済み - 12 1 2010
イベント18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010 - Dresden, ドイツ
継続期間: 8 30 20109 3 2010

その他

その他18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010
ドイツ
Dresden
期間8/30/109/3/10

Fingerprint

Hydrogen
Composite materials
Gases
Carbon black
Cracks
Silica
Fillers
Stress concentration
Reinforcement
Finite element method

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials

これを引用

Yamabe, J., & Nishimura, S. (2010). EStimation of critical pressure of decompression failure of epdm composites for sealing under high-pressure hydrogen gas. 論文発表場所 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, Dresden, ドイツ.

EStimation of critical pressure of decompression failure of epdm composites for sealing under high-pressure hydrogen gas. / Yamabe, J.; Nishimura, Shin.

2010. 論文発表場所 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, Dresden, ドイツ.

研究成果: 会議への寄与タイプ論文

Yamabe, J & Nishimura, S 2010, 'EStimation of critical pressure of decompression failure of epdm composites for sealing under high-pressure hydrogen gas' 論文発表場所 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, Dresden, ドイツ, 8/30/10 - 9/3/10, .
Yamabe J, Nishimura S. EStimation of critical pressure of decompression failure of epdm composites for sealing under high-pressure hydrogen gas. 2010. 論文発表場所 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, Dresden, ドイツ.
Yamabe, J. ; Nishimura, Shin. / EStimation of critical pressure of decompression failure of epdm composites for sealing under high-pressure hydrogen gas. 論文発表場所 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, Dresden, ドイツ.
@conference{b8b43c22fb594807940c1bbcd3e58840,
title = "EStimation of critical pressure of decompression failure of epdm composites for sealing under high-pressure hydrogen gas",
abstract = "To clarify the relationship between the decompression failure behaviours of EPDM and the nature of their reinforcement fillers, EPDM composites were exposed to hydrogen gas at 30 °C and up to 10 MPa. Optical microscopic studies of the interiors of composites showed that cracks initiated as a result of stress concentrations from micrometre-sized bubbles formed by supersaturated hydrogen after decompression. The critical pressure (pFat which no cracks initiated after decompression was determined. Each bubble was regarded as a disc-like cavity with an internal pressure, and its tearing energy (Twas calculated by the finite-element method. The critical inner pressure (II Fwas then calculated on the basis of the criterion that T ≫; Ts,th (the threshold tearing energy for a static crack. The critical hydrogen pressures of unfilled and silica-filled EPDM could be successfully estimated because pF ∼ IIF. However, for the carbon black-filled composite (CBP the value of IIF was about twice that of pF. It is considered that the internal pressure of bubbles (IIbecame higher than the applied pressure of hydrogen (pin terms of absorbed hydrogen on carbon black in CBP, unlike unfilled or silica-filled composites.",
author = "J. Yamabe and Shin Nishimura",
year = "2010",
month = "12",
day = "1",
language = "English",
note = "18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010 ; Conference date: 30-08-2010 Through 03-09-2010",

}

TY - CONF

T1 - EStimation of critical pressure of decompression failure of epdm composites for sealing under high-pressure hydrogen gas

AU - Yamabe, J.

AU - Nishimura, Shin

PY - 2010/12/1

Y1 - 2010/12/1

N2 - To clarify the relationship between the decompression failure behaviours of EPDM and the nature of their reinforcement fillers, EPDM composites were exposed to hydrogen gas at 30 °C and up to 10 MPa. Optical microscopic studies of the interiors of composites showed that cracks initiated as a result of stress concentrations from micrometre-sized bubbles formed by supersaturated hydrogen after decompression. The critical pressure (pFat which no cracks initiated after decompression was determined. Each bubble was regarded as a disc-like cavity with an internal pressure, and its tearing energy (Twas calculated by the finite-element method. The critical inner pressure (II Fwas then calculated on the basis of the criterion that T ≫; Ts,th (the threshold tearing energy for a static crack. The critical hydrogen pressures of unfilled and silica-filled EPDM could be successfully estimated because pF ∼ IIF. However, for the carbon black-filled composite (CBP the value of IIF was about twice that of pF. It is considered that the internal pressure of bubbles (IIbecame higher than the applied pressure of hydrogen (pin terms of absorbed hydrogen on carbon black in CBP, unlike unfilled or silica-filled composites.

AB - To clarify the relationship between the decompression failure behaviours of EPDM and the nature of their reinforcement fillers, EPDM composites were exposed to hydrogen gas at 30 °C and up to 10 MPa. Optical microscopic studies of the interiors of composites showed that cracks initiated as a result of stress concentrations from micrometre-sized bubbles formed by supersaturated hydrogen after decompression. The critical pressure (pFat which no cracks initiated after decompression was determined. Each bubble was regarded as a disc-like cavity with an internal pressure, and its tearing energy (Twas calculated by the finite-element method. The critical inner pressure (II Fwas then calculated on the basis of the criterion that T ≫; Ts,th (the threshold tearing energy for a static crack. The critical hydrogen pressures of unfilled and silica-filled EPDM could be successfully estimated because pF ∼ IIF. However, for the carbon black-filled composite (CBP the value of IIF was about twice that of pF. It is considered that the internal pressure of bubbles (IIbecame higher than the applied pressure of hydrogen (pin terms of absorbed hydrogen on carbon black in CBP, unlike unfilled or silica-filled composites.

UR - http://www.scopus.com/inward/record.url?scp=84870968141&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84870968141&partnerID=8YFLogxK

M3 - Paper

ER -