Estimation on the optimal timing of pruning in young sendan

Kenichiro Yokoo, Junji Matsumura

研究成果: ジャーナルへの寄稿記事

抄録

To establish guidelines for the reliable production of straight Melia azedarach timber up to 4 m long without knots or discoloration, the relationship between planting density and pruning time was examined. Artificial M. azedarach stands(3,000 trees ha-1) were pruned 3 years after planting and the branch stubs were removed completely. This resulted in no discoloration around stubs that were below 2 cm in diameter within 1 year after pruning. However, discoloration occurred in 78-100% of branch stubs greater than 2 cm in diameter, which also required more than 2 years for occlusion. There was an average of approximately ten branches(live and dead) per tree and they were distributed around the top, which was 0.2-5.2 m in height for three planting densities(3,000, 5,000, and 7,000 trees ha-1) without pruning for 3 years. The number of branches above 2 cm in diameter and the proportion of live branches were highest in the low-planting-density stand. These results suggest that the optimal timing for pruning of M. azedarach is within 2 years after planting before the diameter of branches and the tree height exceed 2 cm and 4.5 m, respectively. In addition, the optimal planting density of the species is 5,000 trees ha-1 due to the high probability of crooked trunks at lower planting densities.

元の言語英語
ページ(範囲)70-75
ページ数6
ジャーナルNihon Ringakkai Shi/Journal of the Japanese Forestry Society
101
発行部数2
DOI
出版物ステータス出版済み - 1 1 2019

Fingerprint

pruning
planting
Melia azedarach
discoloration
knots
stand density
young
tree trunk
timber

All Science Journal Classification (ASJC) codes

  • Forestry

これを引用

Estimation on the optimal timing of pruning in young sendan. / Yokoo, Kenichiro; Matsumura, Junji.

:: Nihon Ringakkai Shi/Journal of the Japanese Forestry Society, 巻 101, 番号 2, 01.01.2019, p. 70-75.

研究成果: ジャーナルへの寄稿記事

@article{09c23161fb3c431881d25c0e661dc825,
title = "Estimation on the optimal timing of pruning in young sendan",
abstract = "To establish guidelines for the reliable production of straight Melia azedarach timber up to 4 m long without knots or discoloration, the relationship between planting density and pruning time was examined. Artificial M. azedarach stands(3,000 trees ha-1) were pruned 3 years after planting and the branch stubs were removed completely. This resulted in no discoloration around stubs that were below 2 cm in diameter within 1 year after pruning. However, discoloration occurred in 78-100{\%} of branch stubs greater than 2 cm in diameter, which also required more than 2 years for occlusion. There was an average of approximately ten branches(live and dead) per tree and they were distributed around the top, which was 0.2-5.2 m in height for three planting densities(3,000, 5,000, and 7,000 trees ha-1) without pruning for 3 years. The number of branches above 2 cm in diameter and the proportion of live branches were highest in the low-planting-density stand. These results suggest that the optimal timing for pruning of M. azedarach is within 2 years after planting before the diameter of branches and the tree height exceed 2 cm and 4.5 m, respectively. In addition, the optimal planting density of the species is 5,000 trees ha-1 due to the high probability of crooked trunks at lower planting densities.",
author = "Kenichiro Yokoo and Junji Matsumura",
year = "2019",
month = "1",
day = "1",
doi = "10.4005/jjfs.101.70",
language = "English",
volume = "101",
pages = "70--75",
journal = "Nihon Ringakkai Shi/Journal of the Japanese Forestry Society",
issn = "0021-485X",
publisher = "Nihon Ringakkai",
number = "2",

}

TY - JOUR

T1 - Estimation on the optimal timing of pruning in young sendan

AU - Yokoo, Kenichiro

AU - Matsumura, Junji

PY - 2019/1/1

Y1 - 2019/1/1

N2 - To establish guidelines for the reliable production of straight Melia azedarach timber up to 4 m long without knots or discoloration, the relationship between planting density and pruning time was examined. Artificial M. azedarach stands(3,000 trees ha-1) were pruned 3 years after planting and the branch stubs were removed completely. This resulted in no discoloration around stubs that were below 2 cm in diameter within 1 year after pruning. However, discoloration occurred in 78-100% of branch stubs greater than 2 cm in diameter, which also required more than 2 years for occlusion. There was an average of approximately ten branches(live and dead) per tree and they were distributed around the top, which was 0.2-5.2 m in height for three planting densities(3,000, 5,000, and 7,000 trees ha-1) without pruning for 3 years. The number of branches above 2 cm in diameter and the proportion of live branches were highest in the low-planting-density stand. These results suggest that the optimal timing for pruning of M. azedarach is within 2 years after planting before the diameter of branches and the tree height exceed 2 cm and 4.5 m, respectively. In addition, the optimal planting density of the species is 5,000 trees ha-1 due to the high probability of crooked trunks at lower planting densities.

AB - To establish guidelines for the reliable production of straight Melia azedarach timber up to 4 m long without knots or discoloration, the relationship between planting density and pruning time was examined. Artificial M. azedarach stands(3,000 trees ha-1) were pruned 3 years after planting and the branch stubs were removed completely. This resulted in no discoloration around stubs that were below 2 cm in diameter within 1 year after pruning. However, discoloration occurred in 78-100% of branch stubs greater than 2 cm in diameter, which also required more than 2 years for occlusion. There was an average of approximately ten branches(live and dead) per tree and they were distributed around the top, which was 0.2-5.2 m in height for three planting densities(3,000, 5,000, and 7,000 trees ha-1) without pruning for 3 years. The number of branches above 2 cm in diameter and the proportion of live branches were highest in the low-planting-density stand. These results suggest that the optimal timing for pruning of M. azedarach is within 2 years after planting before the diameter of branches and the tree height exceed 2 cm and 4.5 m, respectively. In addition, the optimal planting density of the species is 5,000 trees ha-1 due to the high probability of crooked trunks at lower planting densities.

UR - http://www.scopus.com/inward/record.url?scp=85067352739&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85067352739&partnerID=8YFLogxK

U2 - 10.4005/jjfs.101.70

DO - 10.4005/jjfs.101.70

M3 - Article

VL - 101

SP - 70

EP - 75

JO - Nihon Ringakkai Shi/Journal of the Japanese Forestry Society

JF - Nihon Ringakkai Shi/Journal of the Japanese Forestry Society

SN - 0021-485X

IS - 2

ER -