Evaluation of atmospheric environment and time-dependent corrosion depth for unpainted carbon steel using Zn/Ag ACM corrosion sensor

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

抜粋

In our previous research, a method for evaluating the corrosion behaviour of unpainted steel plates using an Fe/Ag atmospheric corrosion monitor (ACM) sensor was proposed. In Japan, the atmospheric environment needs to be monitored over all the four seasons in a year to monitor the effect of climate change. In high corrosion environments, Fe/Ag ACM corrosion sensors deteriorate at an early stage, and consequently they must be frequently replaced. This is very uneconomical and makes such sensors hard to use. To solve this problem, a Zn/Ag ACM sensor which has much longer life than an Fe/Ag ACM sensor has been attracting attention. If a Zn/Ag ACM sensor can be used as an alternative tool, it will be possible to make monitoring systems more economical. Thus, to propose a method for evaluating the corrosivity of the atmospheric environment with a Zn/Ag ACM sensor, the relationship between the output of an Fe/Ag ACM sensor and of a Zn/Ag ACM sensor was investigated and the difference was clarified.

元の言語英語
ホスト出版物のタイトル18th International Corrosion Congress 2011
ページ659-664
ページ数6
出版物ステータス出版済み - 12 1 2011
イベント18th International Corrosion Congress 2011 - Perth, WA, オーストラリア
継続期間: 11 20 201111 24 2011

出版物シリーズ

名前18th International Corrosion Congress 2011
1

その他

その他18th International Corrosion Congress 2011
オーストラリア
Perth, WA
期間11/20/1111/24/11

All Science Journal Classification (ASJC) codes

  • Surfaces, Coatings and Films
  • Surfaces and Interfaces

フィンガープリント Evaluation of atmospheric environment and time-dependent corrosion depth for unpainted carbon steel using Zn/Ag ACM corrosion sensor' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Ito, Y., & Kainuma, S. (2011). Evaluation of atmospheric environment and time-dependent corrosion depth for unpainted carbon steel using Zn/Ag ACM corrosion sensor. : 18th International Corrosion Congress 2011 (pp. 659-664). (18th International Corrosion Congress 2011; 巻数 1).