Evaluation of interfacial structure in blends of polypropylene and elastomer by scanning force mircroscopy

Shigeki Nakahara, Masanori Motowoka, Keiji Tanaka, Atsushi Takahara, Tisato Kajiyama

研究成果: ジャーナルへの寄稿記事

抄録

Flat cross-sections of (polypropylene/elastomer) blends were prepared by ultamicrotoming at 150 K. Then, scanning force microscopy (SFM) was applied to each cross-section to evaluate the interfacial thickness between the two phases in the blend. For this purpose, a viscoelastic mode was superior to a conventional topographic mode. The results obtained well reflected the solubility between the two components. Finally, transmission electron microscopy was applied to the sample. The TEM observations supported what was suggested on the basis of SFM results.

元の言語英語
ページ(範囲)432-434
ページ数3
ジャーナルKOBUNSHI RONBUNSHU
62
発行部数9
DOI
出版物ステータス出版済み - 1 1 2005

Fingerprint

Elastomers
Polypropylenes
transmission electron microscopy
microscopy
Atomic force microscopy
cross section
Transmission electron microscopy
Scanning
solubility
Solubility
evaluation

All Science Journal Classification (ASJC) codes

  • Chemical Engineering (miscellaneous)
  • Materials Science (miscellaneous)
  • Environmental Science(all)
  • Polymers and Plastics

これを引用

Evaluation of interfacial structure in blends of polypropylene and elastomer by scanning force mircroscopy. / Nakahara, Shigeki; Motowoka, Masanori; Tanaka, Keiji; Takahara, Atsushi; Kajiyama, Tisato.

:: KOBUNSHI RONBUNSHU, 巻 62, 番号 9, 01.01.2005, p. 432-434.

研究成果: ジャーナルへの寄稿記事

Nakahara, Shigeki ; Motowoka, Masanori ; Tanaka, Keiji ; Takahara, Atsushi ; Kajiyama, Tisato. / Evaluation of interfacial structure in blends of polypropylene and elastomer by scanning force mircroscopy. :: KOBUNSHI RONBUNSHU. 2005 ; 巻 62, 番号 9. pp. 432-434.
@article{4894083aa0d1490d90b142af87098690,
title = "Evaluation of interfacial structure in blends of polypropylene and elastomer by scanning force mircroscopy",
abstract = "Flat cross-sections of (polypropylene/elastomer) blends were prepared by ultamicrotoming at 150 K. Then, scanning force microscopy (SFM) was applied to each cross-section to evaluate the interfacial thickness between the two phases in the blend. For this purpose, a viscoelastic mode was superior to a conventional topographic mode. The results obtained well reflected the solubility between the two components. Finally, transmission electron microscopy was applied to the sample. The TEM observations supported what was suggested on the basis of SFM results.",
author = "Shigeki Nakahara and Masanori Motowoka and Keiji Tanaka and Atsushi Takahara and Tisato Kajiyama",
year = "2005",
month = "1",
day = "1",
doi = "10.1295/koron.62.432",
language = "English",
volume = "62",
pages = "432--434",
journal = "Kobunshi Ronbunshu",
issn = "0386-2186",
publisher = "The Society of Polymer Science, Japan",
number = "9",

}

TY - JOUR

T1 - Evaluation of interfacial structure in blends of polypropylene and elastomer by scanning force mircroscopy

AU - Nakahara, Shigeki

AU - Motowoka, Masanori

AU - Tanaka, Keiji

AU - Takahara, Atsushi

AU - Kajiyama, Tisato

PY - 2005/1/1

Y1 - 2005/1/1

N2 - Flat cross-sections of (polypropylene/elastomer) blends were prepared by ultamicrotoming at 150 K. Then, scanning force microscopy (SFM) was applied to each cross-section to evaluate the interfacial thickness between the two phases in the blend. For this purpose, a viscoelastic mode was superior to a conventional topographic mode. The results obtained well reflected the solubility between the two components. Finally, transmission electron microscopy was applied to the sample. The TEM observations supported what was suggested on the basis of SFM results.

AB - Flat cross-sections of (polypropylene/elastomer) blends were prepared by ultamicrotoming at 150 K. Then, scanning force microscopy (SFM) was applied to each cross-section to evaluate the interfacial thickness between the two phases in the blend. For this purpose, a viscoelastic mode was superior to a conventional topographic mode. The results obtained well reflected the solubility between the two components. Finally, transmission electron microscopy was applied to the sample. The TEM observations supported what was suggested on the basis of SFM results.

UR - http://www.scopus.com/inward/record.url?scp=27744575456&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27744575456&partnerID=8YFLogxK

U2 - 10.1295/koron.62.432

DO - 10.1295/koron.62.432

M3 - Article

AN - SCOPUS:27744575456

VL - 62

SP - 432

EP - 434

JO - Kobunshi Ronbunshu

JF - Kobunshi Ronbunshu

SN - 0386-2186

IS - 9

ER -