介在物を有する高強度切欠き材の強度評価: 鋳造高速度鋼材を例にとって

濱田 繁, 柏木 卓, 園田 晃大, 和泉 直志, 野口 博司

研究成果: Contribution to journalArticle査読

抄録

In order to establish strength evaluation method of the high strength notch material which has an inclusion, tensile tests of material which have various notch radius and fracture toughness tests about high strength casting high speed steel materials were performed. The validity of considering that an inclusion is equivalent to a crack and considering the influence which the interference between an inclusion and a notch has on tensile strength in fracture mechanics using stress intensity factor were examined. Tensile fracture conditions were evaluated by defining one formulas which calculate the stress intensity factor which used √<area> parameter model as the tensile fracture conditions K_<IB>(ρ). As a result of the test, as for the high strength notch material containing many inclusions, the notch root maximum elastic stress at the time of the fracture varied, and it was shown clearly that the cause was because an inclusion size varies. Moreover, a strength evaluation with little scatter was possible by making K_<IB>(ρ) into fracture conditions. That is, it was shown clearly by considering that an inclusion is equivalent to a crack that it is effective to consider the influence which the interference between an inclusion and a notch has on tensile strength in fracture mechanics using a stress intensity factor.
寄稿の翻訳タイトルEvaluation of Notch Tensile Strength for High Strength Steel with Inclusions: In Case of Casting High Speed Steel
本文言語日本語
ページ(範囲)1764-1770
ページ数7
ジャーナルNihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
75
760
DOI
出版ステータス出版済み - 2009

フィンガープリント

「介在物を有する高強度切欠き材の強度評価: 鋳造高速度鋼材を例にとって」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル