Evaluation of suction performance of inducer with splitter blade

Yohei Tanaka, Takahiro Kitabata, Satoshi Watanabe, Satoru Ohashi, Akira Sakata, Yasushi Matsunaga

研究成果: Contribution to journalArticle査読

抄録

For general-use turbopumps with inducer, instability-free operation is required as well as high suction performance in a wide operating range from shut-off to over flow rates. Among the instabilities, the cavitation surge at low flow rates is a very vital phenomenon that is known to be strongly associated with the occurrence of inlet back flow. The low inlet blade angle would be favorable for the suppression of inlet backflow through the reduction of blade loading at the inlet, while the inlet throat area should be kept large for better suction performance to minimize the flow blockage due to cavitation. In the present study, a splitter blade inducer is designed on the basis of the knowledge acquired by our previous CFD study conducted for the 2-D cascade and 3-D straight-hub inducer. Then the effectiveness of the splitter inducer is investigated by experiments and CFD. As a result, the inlet backflow and the cavitation surge are found to be suppressed in the splitter inducer, which is achieved by reducing the blade loading with low inlet blade angle. The suction performance is improved at high flow rates by relaxing the low pressure region with high relative velocity.

本文言語英語
ページ(範囲)13-24
ページ数12
ジャーナルInternational Journal of Fluid Machinery and Systems
14
1
DOI
出版ステータス出版済み - 1 1 2021

All Science Journal Classification (ASJC) codes

  • 機械工学
  • 産業および生産工学

フィンガープリント

「Evaluation of suction performance of inducer with splitter blade」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル