Experimental study and performance simulation of a wet flue gas desulfurization system

Junichi Oka, Nobuyuki Nishi, Hiroki Yoshii, Yosuke Matsukuma, Gen Inoue, Masaki Minemoto

研究成果: Contribution to journalArticle査読

1 被引用数 (Scopus)

抄録

Wet flue gas desulfurization (FGD) systems that remove sulfur dioxide (SO2) from in flue gas, a cause of acid rain, operate at many power plants, but problems remain to be solved concerning the detailed behavior of these systems. Here, we experimentally studied the behaviors of O2 and CO2, which have not been fully clarified, and conducted simulations using models based on the present experimental results for O 2 and CO2 and results reported for other chemical models. From the experimental results, we obtained an equation for O2 absorption as a function of superficial gas velocity, and one for CO2 desorption as a function of superficial gas velocity, pH and temperature for the oxidation tank in an FGD system. We also conducted simulations for FGD systems based on the typical chemical behaviors observed experimentally. First, we calculated the distributions of flue gas concentration, pH, and the solid phase absorbent concentration for two typical FGD methods, the limestone-gypsum method (LGM) and magnesium hydroxide method (MHM), and studied the differences in behavior between them. Next, we studied the optimum values of water depth in the oxidation tank and gas flow rate of the air compressor for oxidation and got the values off) m for the former, and of 2,500 m3 (STP) · h-1 (LGM); 2,700 m3 (STP) · h-1 (MHM) for the latter.

本文言語英語
ページ(範囲)534-543
ページ数10
ジャーナルkagaku kogaku ronbunshu
33
6
DOI
出版ステータス出版済み - 2007

All Science Journal Classification (ASJC) codes

  • 化学 (全般)
  • 化学工学(全般)

フィンガープリント

「Experimental study and performance simulation of a wet flue gas desulfurization system」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル