Extension of discontinuous deformation analysis and application in cohesive-frictional slope analysis

Yingbin Zhang, Qiang Xu, Guangqi Chen, John X. Zhao, Lu Zheng

研究成果: ジャーナルへの寄稿記事

55 引用 (Scopus)

抜粋

This paper extends the discontinuous deformation analysis (DDA) by using an additional evaluation of edge-to-edge contact, with the aim that it can be used to accurately model the failure behaviour of joints dominated by both cohesion and interface friction angle. The original DDA can deal well with the effects of interface friction angle. However, when cohesion exists, DDA results often show an inscrutable behaviour, i.e. a slope may be unstable even if the cohesion is much greater than the theoretical value required for its critical stability. After many detailed investigations and validations, joint contact treatment was found to be the key reason why the original DDA cannot simulate the cohesive material accurately, in which every edge-to-edge contact is treated as two vertex-to-edge contacts that may have different contact states associated with different cohesion treatments. In order to solve this problem, an additional contact type determination process for an edge-to-edge contact was added into the original computer code to avoid the unreasonable situation when two contact states exist in one joint. Several examples were performed to illustrate the accuracy of the modified code and a real landslide case was analysed by using the improved DDA to estimate the shear strength on the interface. Our results show that the improved DDA can simulate the failure of cohesive-frictional material accurately.

元の言語英語
ページ(範囲)533-545
ページ数13
ジャーナルInternational Journal of Rock Mechanics and Mining Sciences
70
DOI
出版物ステータス出版済み - 9 2014

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Geotechnical Engineering and Engineering Geology

これを引用