Fabrication and characterization of large-area flexible microfluidic organic light-emitting diode with liquid organic semiconductor

Miho Tsuwaki, Takashi Kasahara, Tomohiko Edura, Shigeyuki Matsunami, Juro Oshima, Shuichi Shoji, Chihaya Adachi, Jun Mizuno

研究成果: Contribution to journalArticle査読

30 被引用数 (Scopus)

抄録

We propose simple and high-throughput fabrication of large-area flexible microfluidic organic light-emitting diodes (microfluidic OLEDs). Flexible electro-SU-8-microchannels with a liquid emission layer were fabricated by the following four steps: (a) screen printing for transparent electrodes, (b) novel belttransfer exposure for SU-8, (c) heterogeneous low-temperature bonding using self-assembled monolayers (SAMs), and (d) injecting a liquid emitter into the microchannels. 1-Pyrenebutyric acid 2-ethylhexyl ester (PLQ), which is on of liquid organic semiconductors, was used as a liquid emitter. The liquid emitter successfully filled the flexible microchannels, and electroluminescence was obtained both in flat and curved states. The proposed microfluidic OLED is applicable for future flexible posters or displays, and can be adopted around curved surfaces.

本文言語英語
ページ(範囲)231-236
ページ数6
ジャーナルSensors and Actuators, A: Physical
216
DOI
出版ステータス出版済み - 9 1 2014

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 器械工学
  • 凝縮系物理学
  • 表面、皮膜および薄膜
  • 金属および合金
  • 電子工学および電気工学

フィンガープリント

「Fabrication and characterization of large-area flexible microfluidic organic light-emitting diode with liquid organic semiconductor」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル