Fabrication and properties of SrO-ZnO-P2O5 glass-Al2O3 composites

Seiji Toyoda, Kunio Sugamura, Yoshirou Kuromitsu, Shigeru Fujino, Hiromichi Takebe, Kenji Morinaga

    研究成果: Contribution to journalArticle査読

    1 被引用数 (Scopus)

    抄録

    Glass-ceramic composites consisting of 10SrO·50ZnO·40P2O5 (SZP) glass and Al2O3 with various particle sizes and specific surface areas were fabricated for the barrier-rib of plasma display panel. The variations of density, microstructure, bending strength and thermal expansion coefficient with Al2O3 contents were studied for SZP/Al2O3 composites. The positively or negatively charged surface state of SZP and Al2O3 particles was estimated from the pH of the aqueous suspensions prepared using the mixture of SZP glass or Al2O3 particles with 10 vol% and distilled water with pH 7 without pH adjustment. The combination of SZP glass and Al2O3 raw materials with similar charged surface state provides a dense SZP/Al2O3 sintered composite with a relatively-high bending strength and with a homogeneous microstructure.

    本文言語英語
    ページ(範囲)497-501
    ページ数5
    ジャーナルJournal of the Ceramic Society of Japan
    111
    1295
    DOI
    出版ステータス出版済み - 7 2003

    All Science Journal Classification (ASJC) codes

    • セラミックおよび複合材料
    • 化学 (全般)
    • 凝縮系物理学
    • 材料化学

    フィンガープリント

    「Fabrication and properties of SrO-ZnO-P<sub>2</sub>O<sub>5</sub> glass-Al<sub>2</sub>O<sub>3</sub> composites」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル