Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES

Hidemi Hayashi, Hironobu Kimura, Yasuhiro Hatabe, Katsuya Tsutsumi, Akira Tomioka, Takaaki Bohno, Shinichi Nose, Yujiro Yagi, Toshinori Ishii, Masataka Iwakuma, Kazuo Funaki

研究成果: ジャーナルへの寄稿Conference article

6 引用 (Scopus)

抄録

We designed and fabricated a 4 kJ conduction-cooled high-Tc superconducting (HTS) pulse coil. The coil is wound with an interlayer-transposed 6-strand parallel conductor which is composed of Bi-2223 silver alloy-sheathed multi-filamentary wires. We had developed a complete 3.6 MJ/1 MW low-Tc superconducting (LTS) SMES system for testing on a power line at Imajuku substation. Aiming at the feasible operation of SMES applying a HTS coil, we made a SMES system set-up in which HTS coils were serially connected to 3 LTS coils of the SMES. The SMES including the HTS coil was connected to Imajuku substation's power system, to made operational tests of compensation for load fluctuation at the 6 kV power line. The test results lead to the feasibility of the HTS SMES for practical use in future power systems.

元の言語英語
ページ(範囲)1867-1870
ページ数4
ジャーナルIEEE Transactions on Applied Superconductivity
13
発行部数2 II
DOI
出版物ステータス出版済み - 6 1 2003
イベント2002 Applied Superconductivity Conference - Houston, TX, 米国
継続期間: 8 4 20028 9 2002

Fingerprint

coils
Fabrication
fabrication
pulses
power lines
Silver alloys
silver alloys
Wire
strands
Superconducting coils
interlayers
Testing
conductors
wire
conduction

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

これを引用

Hayashi, H., Kimura, H., Hatabe, Y., Tsutsumi, K., Tomioka, A., Bohno, T., ... Funaki, K. (2003). Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES. IEEE Transactions on Applied Superconductivity, 13(2 II), 1867-1870. https://doi.org/10.1109/TASC.2003.812932

Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES. / Hayashi, Hidemi; Kimura, Hironobu; Hatabe, Yasuhiro; Tsutsumi, Katsuya; Tomioka, Akira; Bohno, Takaaki; Nose, Shinichi; Yagi, Yujiro; Ishii, Toshinori; Iwakuma, Masataka; Funaki, Kazuo.

:: IEEE Transactions on Applied Superconductivity, 巻 13, 番号 2 II, 01.06.2003, p. 1867-1870.

研究成果: ジャーナルへの寄稿Conference article

Hayashi, H, Kimura, H, Hatabe, Y, Tsutsumi, K, Tomioka, A, Bohno, T, Nose, S, Yagi, Y, Ishii, T, Iwakuma, M & Funaki, K 2003, 'Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES', IEEE Transactions on Applied Superconductivity, 巻. 13, 番号 2 II, pp. 1867-1870. https://doi.org/10.1109/TASC.2003.812932
Hayashi H, Kimura H, Hatabe Y, Tsutsumi K, Tomioka A, Bohno T その他. Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES. IEEE Transactions on Applied Superconductivity. 2003 6 1;13(2 II):1867-1870. https://doi.org/10.1109/TASC.2003.812932
Hayashi, Hidemi ; Kimura, Hironobu ; Hatabe, Yasuhiro ; Tsutsumi, Katsuya ; Tomioka, Akira ; Bohno, Takaaki ; Nose, Shinichi ; Yagi, Yujiro ; Ishii, Toshinori ; Iwakuma, Masataka ; Funaki, Kazuo. / Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES. :: IEEE Transactions on Applied Superconductivity. 2003 ; 巻 13, 番号 2 II. pp. 1867-1870.
@article{a50346297b0a4153ac224b6243f4a63e,
title = "Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES",
abstract = "We designed and fabricated a 4 kJ conduction-cooled high-Tc superconducting (HTS) pulse coil. The coil is wound with an interlayer-transposed 6-strand parallel conductor which is composed of Bi-2223 silver alloy-sheathed multi-filamentary wires. We had developed a complete 3.6 MJ/1 MW low-Tc superconducting (LTS) SMES system for testing on a power line at Imajuku substation. Aiming at the feasible operation of SMES applying a HTS coil, we made a SMES system set-up in which HTS coils were serially connected to 3 LTS coils of the SMES. The SMES including the HTS coil was connected to Imajuku substation's power system, to made operational tests of compensation for load fluctuation at the 6 kV power line. The test results lead to the feasibility of the HTS SMES for practical use in future power systems.",
author = "Hidemi Hayashi and Hironobu Kimura and Yasuhiro Hatabe and Katsuya Tsutsumi and Akira Tomioka and Takaaki Bohno and Shinichi Nose and Yujiro Yagi and Toshinori Ishii and Masataka Iwakuma and Kazuo Funaki",
year = "2003",
month = "6",
day = "1",
doi = "10.1109/TASC.2003.812932",
language = "English",
volume = "13",
pages = "1867--1870",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2 II",

}

TY - JOUR

T1 - Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES

AU - Hayashi, Hidemi

AU - Kimura, Hironobu

AU - Hatabe, Yasuhiro

AU - Tsutsumi, Katsuya

AU - Tomioka, Akira

AU - Bohno, Takaaki

AU - Nose, Shinichi

AU - Yagi, Yujiro

AU - Ishii, Toshinori

AU - Iwakuma, Masataka

AU - Funaki, Kazuo

PY - 2003/6/1

Y1 - 2003/6/1

N2 - We designed and fabricated a 4 kJ conduction-cooled high-Tc superconducting (HTS) pulse coil. The coil is wound with an interlayer-transposed 6-strand parallel conductor which is composed of Bi-2223 silver alloy-sheathed multi-filamentary wires. We had developed a complete 3.6 MJ/1 MW low-Tc superconducting (LTS) SMES system for testing on a power line at Imajuku substation. Aiming at the feasible operation of SMES applying a HTS coil, we made a SMES system set-up in which HTS coils were serially connected to 3 LTS coils of the SMES. The SMES including the HTS coil was connected to Imajuku substation's power system, to made operational tests of compensation for load fluctuation at the 6 kV power line. The test results lead to the feasibility of the HTS SMES for practical use in future power systems.

AB - We designed and fabricated a 4 kJ conduction-cooled high-Tc superconducting (HTS) pulse coil. The coil is wound with an interlayer-transposed 6-strand parallel conductor which is composed of Bi-2223 silver alloy-sheathed multi-filamentary wires. We had developed a complete 3.6 MJ/1 MW low-Tc superconducting (LTS) SMES system for testing on a power line at Imajuku substation. Aiming at the feasible operation of SMES applying a HTS coil, we made a SMES system set-up in which HTS coils were serially connected to 3 LTS coils of the SMES. The SMES including the HTS coil was connected to Imajuku substation's power system, to made operational tests of compensation for load fluctuation at the 6 kV power line. The test results lead to the feasibility of the HTS SMES for practical use in future power systems.

UR - http://www.scopus.com/inward/record.url?scp=0041472314&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0041472314&partnerID=8YFLogxK

U2 - 10.1109/TASC.2003.812932

DO - 10.1109/TASC.2003.812932

M3 - Conference article

VL - 13

SP - 1867

EP - 1870

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 2 II

ER -