Fabrication of fine α-alumina powders by thermal decomposition of ammonium aluminum carbonate hydroxide (AACH)

K. Morinaga, T. Torikai, K. Nakagawa, S. Fujino

    研究成果: Contribution to journalArticle

    74 引用 (Scopus)

    抜粋

    In this paper, the phase transformations that occur during the thermal decomposition of ammonium aluminum carbonate hydroxide (AACH) into α-Al2O3 have been studied. Amorphous, γ-, and θ-Al2O3 were identified as intermediate products. A time-temperature-transformation (TTT) diagram for thermal decomposition in air was determined. The critical particle size of θ-Al2O3 in the θ→α phase transformation is approximately 30 nm; the size does not depend on the firing atmosphere. However, the atmosphere affects the grain size distribution of the final α-Al2O3 particles. Powders with an average grain size of 60 nm were obtained by firing in vacuum or hydrogen.

    元の言語英語
    ページ(範囲)4735-4741
    ページ数7
    ジャーナルActa Materialia
    48
    発行部数18-19
    DOI
    出版物ステータス出版済み - 12 1 2000

    All Science Journal Classification (ASJC) codes

    • Electronic, Optical and Magnetic Materials
    • Ceramics and Composites
    • Polymers and Plastics
    • Metals and Alloys

    フィンガープリント Fabrication of fine α-alumina powders by thermal decomposition of ammonium aluminum carbonate hydroxide (AACH)' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用