Fabrication of microfluidic electrogenerated chemiluminescence cells incorporated with titanium dioxide nanoparticles to improve luminescent performances

Koji Okada, Ryoichi Ishimatsu, Jun Mizuno, Takashi Kasahara

    研究成果: Contribution to journalArticle査読

    抄録

    We demonstrated microfluidic electrogenerated chemiluminescence cells incorporated with titanium dioxide nanoparticles (TiO2 NPs). SU-8-based microchannels were fabricated on a fluorine doped tin oxide cathodes-patterned glass substrate. TiO2 NPs were coated on the cathodes as an electron injection layer. The enclosed microchannels were achieved by a direct bonding of the SU-8 surface to an indium tin oxide anode-patterned polyethylene terephthalate film via vacuum ultraviolet treatment. A tris(2,2′-bipyridine)ruthenium(II) solution was used as an emitter. The proposed device exhibited a maximum luminance of 93.5 cd m-2 at 3.3 V, which is 1.45 times higher than that of device without TiO2 NPs.

    本文言語英語
    論文番号107001
    ジャーナルApplied Physics Express
    13
    10
    DOI
    出版ステータス出版済み - 10 1 2020

    All Science Journal Classification (ASJC) codes

    • 工学(全般)
    • 物理学および天文学(全般)

    フィンガープリント

    「Fabrication of microfluidic electrogenerated chemiluminescence cells incorporated with titanium dioxide nanoparticles to improve luminescent performances」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル