レーザ粉末積層造形法による多孔質超硬合金の創製

姜 賢求, 石井 智之, 津守 不二夫, 三浦 秀士

研究成果: Contribution to journalArticle査読

抄録

This study deals with manufacturing of porous structured WC-Co alloy compacts and the forming mechanism by indirect laser forming. In this process, added binder is melted and formed as designed shape by irradiated laser beam. Therefore, the effects of laser energy density on the relative density and forming mechanism were mainly investigated. As the results, the porosity of WC-Co alloy compacts could be controlled by laser energy density decided by scan rate, scan pitch and feedstock layer thickness. It was also found that remained binder amount play an important role in forming pores during liquid phase sintering in WC-Co alloy compacts. Finally, the smart porous structured WC-Co alloy compacts which own the dense surface layer and porous interior was manufactured by controlling the laser energy density.
寄稿の翻訳タイトルFabrication of Porous Structured WC-Co Alloy Compacts by Indirect Laser Forming
本文言語日本語
ページ(範囲)436-441
ページ数6
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
58
7
DOI
出版ステータス出版済み - 7 15 2011

フィンガープリント

「レーザ粉末積層造形法による多孔質超硬合金の創製」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル