Fabrication of ZnO nanoparticles confined in the channels of mesoporous carbon

Ulka Suryavanshi, Toru Iijima, Akari Hayashi, Yasuhiko Hayashi, Masaki Tanemura

研究成果: ジャーナルへの寄稿学術誌査読

33 被引用数 (Scopus)

抄録

ZnO nanoparticles have been incorporated inside the pore system of mesoporous carbon (MC) which has been synthesized by polymerization of resorcinol and formaldehyde via soft templating approach. 5-20% of ZnO, with an interval of 5, have been incorporated almost exclusively within the mesopores by simple wet impregnation, drying and calcination procedures. The pristine MC shows high surface area (600m 2/g) with large pore diameter around 7nm. After impregnation of ZnO in mesopores, the pore diameter has been decreased from 7 to 6.24nm which may relate to shrinkage of the framework or deposition of ZnO particles on the inner wall of the pores. With the increase in the ZnO percentage, the specific surface area and pore volume decreased linearly confirming the incorporation of nanoparticles inside the mesopores. TGA confirms ZnO confined in the pores of MC which also prevents the collapsing of mesoporous carbon framework upto 325°C. Interestingly, the graphitic nature of MC remains same even after impregnation of ZnO nanoparticles inside the pores. However, we strongly believe that this novel composite of ZnO and MC may play significant role in the application like oxygen reduction reactions, photocatalysis, photovoltaics, optoelectronics, catalysis and many more.

本文言語英語
ページ(範囲)388-393
ページ数6
ジャーナルChemical Engineering Journal
179
DOI
出版ステータス出版済み - 1月 1 2012

!!!All Science Journal Classification (ASJC) codes

  • 化学 (全般)
  • 環境化学
  • 化学工学(全般)
  • 産業および生産工学

フィンガープリント

「Fabrication of ZnO nanoparticles confined in the channels of mesoporous carbon」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル