Facile synthesis and characterization of sulfur doped low bandgap bismuth based perovskites by soluble precursor route

Murugan Vigneshwaran, Takeshi Ohta, Satoshi Iikubo, Gaurav Kapil, Teresa S. Ripolles, Yuhei Ogomi, Tingli Ma, Shyam S. Pandey, Qing Shen, Taro Toyoda, Kenji Yoshino, Takashi Minemoto, Shuzi Hayase

研究成果: Contribution to journalArticle査読

61 被引用数 (Scopus)

抄録

The bismuth based perovskite with the structure (CH3NH3)3Bi2I9 (MBI) is rapidly emerging as eco-friendly and stable semiconducting material as a substitute for the lead halide perovskites. A relatively higher bandgap of MBI (about 2.1 eV) has been found to be a bottleneck in realizing the high photovoltaic performance similar to that of lead halide based perovskites. We demonstrate the bandgap engineering of novel bismuth based perovskites obtained by in situ sulfur doping of MBI via the thermal decomposition of Bi(xt)3 (xt = ethyl xanthate) precursor. Colors of the obtained films clearly changed from orange to black when annealed from 80 to 120 °C. Formation of sulfur doped MA3Bi2I9 was confirmed by XRD and the presence of sulfur was confirmed through XPS. In this work, obtained sulfur doped bismuth perovskites exhibited a bandgap of 1.45 eV which is even lower than that of most commonly used lead halide perovskites. Hall-Effect measurements showed that the carrier concentration and mobility are much higher as compared to that of undoped MA3Bi2I9.

本文言語英語
ページ(範囲)6436-6440
ページ数5
ジャーナルChemistry of Materials
28
18
DOI
出版ステータス出版済み - 9 27 2016
外部発表はい

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)
  • Materials Chemistry

フィンガープリント 「Facile synthesis and characterization of sulfur doped low bandgap bismuth based perovskites by soluble precursor route」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル