Fatigue strength of sintered and carburized compacts made of molybdenum hybrid-alloyed steel powder

Shigeru Unami, Yukiko Ozaki, Satoshi Uenosono

研究成果: Contribution to journalArticle

4 引用 (Scopus)

抜粋

The fatigue strength of the sintered and carburized compact made of the Mo hybrid-alloyed steel powder, which is based on a 0.6mass%Mo prealloyed steel powder to which 0.2mass%Mo powder particles have been diffusion bonded, is higher than that of the 0.6mass%Mo prealloyed steel powder. The sintered compact made of the Mo hybrid-alloyed steel powder has a finer pore structure than that of the Mo prealloyed steel powder, because the Mo-rich region near the surface of the Mo hybrid-alloyed steel powder should exist as the α-iron phase with a high diffusion coefficient at high temperature and result in enhanced sintering. Improvement in the fatigue strength of the sintered and carburized compact made of the Mo hybrid-alloyed steel powder should result from not only the fine pore structure but also the strengthening of the sintering neck by Mo concentration around pores.

元の言語英語
ページ(範囲)519-524
ページ数6
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
54
発行部数7
DOI
出版物ステータス出版済み - 7 1 2007
外部発表Yes

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント Fatigue strength of sintered and carburized compacts made of molybdenum hybrid-alloyed steel powder' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用