Fault Diagnosis Using Condition for Cause-Effect Relationship among State Variables

Kazuhiro Takeda, Yoshifumi Tsuge, Hisayoshi Matsuyama

研究成果: ジャーナルへの寄稿記事

抄録

It is essential to quantitatively estimate the performance of fault diagnosis. In particular, two quantitative performance criteria are very important: diagnostic reliability and diagnostic accuracy. Each criteria is defined for the design phase and the running phase, respectively. This paper addresses diagnostic reliability for the running phase and diagnostic reliability and accuracy for the design phase. A fault diagnostic method utilizing signed directed graph is proposed. In this paper, a modified fault diagnosis method which has higher diagnostic accuracy than the aforementioned method's diagnostic accuracy is proposed. The proposed method uses conditions for cause-effect relationship among state variables. Furthermore, the performance of the proposed method and criteria is demonstrated by use of mini-plant.

元の言語英語
ページ(範囲)1009-1017
ページ数9
ジャーナルkagaku kogaku ronbunshu
22
発行部数5
DOI
出版物ステータス出版済み - 1 1 1996

Fingerprint

Failure analysis
Directed graphs

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)

これを引用

Fault Diagnosis Using Condition for Cause-Effect Relationship among State Variables. / Takeda, Kazuhiro; Tsuge, Yoshifumi; Matsuyama, Hisayoshi.

:: kagaku kogaku ronbunshu, 巻 22, 番号 5, 01.01.1996, p. 1009-1017.

研究成果: ジャーナルへの寄稿記事

Takeda, Kazuhiro ; Tsuge, Yoshifumi ; Matsuyama, Hisayoshi. / Fault Diagnosis Using Condition for Cause-Effect Relationship among State Variables. :: kagaku kogaku ronbunshu. 1996 ; 巻 22, 番号 5. pp. 1009-1017.
@article{541604ebf557469296decf4a31a73e68,
title = "Fault Diagnosis Using Condition for Cause-Effect Relationship among State Variables",
abstract = "It is essential to quantitatively estimate the performance of fault diagnosis. In particular, two quantitative performance criteria are very important: diagnostic reliability and diagnostic accuracy. Each criteria is defined for the design phase and the running phase, respectively. This paper addresses diagnostic reliability for the running phase and diagnostic reliability and accuracy for the design phase. A fault diagnostic method utilizing signed directed graph is proposed. In this paper, a modified fault diagnosis method which has higher diagnostic accuracy than the aforementioned method's diagnostic accuracy is proposed. The proposed method uses conditions for cause-effect relationship among state variables. Furthermore, the performance of the proposed method and criteria is demonstrated by use of mini-plant.",
author = "Kazuhiro Takeda and Yoshifumi Tsuge and Hisayoshi Matsuyama",
year = "1996",
month = "1",
day = "1",
doi = "10.1252/kakoronbunshu.22.1009",
language = "English",
volume = "22",
pages = "1009--1017",
journal = "Kagaku Kogaku Ronbunshu",
issn = "0386-216X",
publisher = "The Society of Chemical Engineers, Japan",
number = "5",

}

TY - JOUR

T1 - Fault Diagnosis Using Condition for Cause-Effect Relationship among State Variables

AU - Takeda, Kazuhiro

AU - Tsuge, Yoshifumi

AU - Matsuyama, Hisayoshi

PY - 1996/1/1

Y1 - 1996/1/1

N2 - It is essential to quantitatively estimate the performance of fault diagnosis. In particular, two quantitative performance criteria are very important: diagnostic reliability and diagnostic accuracy. Each criteria is defined for the design phase and the running phase, respectively. This paper addresses diagnostic reliability for the running phase and diagnostic reliability and accuracy for the design phase. A fault diagnostic method utilizing signed directed graph is proposed. In this paper, a modified fault diagnosis method which has higher diagnostic accuracy than the aforementioned method's diagnostic accuracy is proposed. The proposed method uses conditions for cause-effect relationship among state variables. Furthermore, the performance of the proposed method and criteria is demonstrated by use of mini-plant.

AB - It is essential to quantitatively estimate the performance of fault diagnosis. In particular, two quantitative performance criteria are very important: diagnostic reliability and diagnostic accuracy. Each criteria is defined for the design phase and the running phase, respectively. This paper addresses diagnostic reliability for the running phase and diagnostic reliability and accuracy for the design phase. A fault diagnostic method utilizing signed directed graph is proposed. In this paper, a modified fault diagnosis method which has higher diagnostic accuracy than the aforementioned method's diagnostic accuracy is proposed. The proposed method uses conditions for cause-effect relationship among state variables. Furthermore, the performance of the proposed method and criteria is demonstrated by use of mini-plant.

UR - http://www.scopus.com/inward/record.url?scp=24044504530&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=24044504530&partnerID=8YFLogxK

U2 - 10.1252/kakoronbunshu.22.1009

DO - 10.1252/kakoronbunshu.22.1009

M3 - Article

AN - SCOPUS:24044504530

VL - 22

SP - 1009

EP - 1017

JO - Kagaku Kogaku Ronbunshu

JF - Kagaku Kogaku Ronbunshu

SN - 0386-216X

IS - 5

ER -