Flame propagation into lean region in stratified mixture

Toshiaki Kitagawa, H. Kido, K. S. Kim, K. Fujioka

研究成果: Contribution to conferencePaper査読

抄録

In diesel engines, most of the fuel is burned in a diffusion combustion phase, leading to the formation of excessive amount of soot and NOx emissions. To decrease soot and NOx emissions simultaneously, the concept of lean homogeneous charge compression ignition (HCCI) engine was proposed. The onset of the combustion of the HCCI engine depended on the autoignition of the fuel, thus, it was quite difficult to control the start of combustion. In contrast, Pulsed Flame Jet (PFJ) showed a great potential to enhance ignition reliability and burning rate in lean mixtures within the lean flammability limit. A compact rapid compression machine (RCM) was used in the experiments, and the fuels used were lean n-butane/air mixtures. The compression ratio of RCM was adjusted to 14.7, and the cavity volume of PFJ used was 500 cu mm and two orifice diameters (4 and 2.5 mm) were used. Thus, the start of combustion of lean n-butane/air mixtures changed appropriately with varying the ignition timing of PFJ. PFJ shoed a potential for ignition timing control of homogeneous charge compression ignition combustion. Original is an abstract.

本文言語英語
ページ数1
出版ステータス出版済み - 12 1 2002
イベント29th International Symposium on Combustion - Sapporo, 日本
継続期間: 7 21 20027 26 2002

その他

その他29th International Symposium on Combustion
国/地域日本
CitySapporo
Period7/21/027/26/02

All Science Journal Classification (ASJC) codes

  • 工学(全般)

フィンガープリント

「Flame propagation into lean region in stratified mixture」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル