Flow measurement in helical inducer and estimate of fluctuating blade force in cavitation surge phenomena

Akinori Furukawa, Koichi Ishizaka, Satoshi Watanabe

研究成果: Contribution to journalArticle査読

15 被引用数 (Scopus)

抄録

An attachment of inducer is a powerful method to improve the cavitation performance of a turbo-pump. Cavitation surge phenomena, occuring under the severe suction pressure at a partial flow rate, is focussed in the present paper. Flow measurements were carried out at the inlet and outlet sections of a flat-plate helical inducer with the solidity of 2.0 and tip blade angle of 11° by using a total-head yaw-meter with a phase locked sampling method in one period of the shaft rotation or the cavitation oscillation. Time variation of the flow distributions during the oscillation is clarified with observed cavitation behaviors. After these results are compared with those in conditions just before and after the oscillations, the fluctuating blade forces are estimated from the blade to blade distributions of casing wall pressures measured in these conditions.

本文言語英語
ページ(範囲)672-677
ページ数6
ジャーナルJSME International Journal, Series B: Fluids and Thermal Engineering
45
3
DOI
出版ステータス出版済み - 8 2002

All Science Journal Classification (ASJC) codes

  • 機械工学
  • 物理化学および理論化学
  • 流体および伝熱

フィンガープリント

「Flow measurement in helical inducer and estimate of fluctuating blade force in cavitation surge phenomena」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル