Flux pinning properties and microstructure in Sm1+xBa 2-xCu3Oy films with BaZrO3 nanorods fabricated by vapor-liquid-solid growth technique

Shuhei Funaki, Yutaka Yoshida, Yusuke Ichino, Toshinori Ozaki, Takahiro Harada, Yoshiaki Takai, Kaname Matsumoto, Ataru Ichinose, Masashi Mukaida, Ryusuke Kita, Shigeru Horii

研究成果: Contribution to journalArticle査読

5 被引用数 (Scopus)

抄録

Abstract-For an improvement of Jc under applied magnetic fields, an addition of BaZr03 (BZO) nanorods into REBa2Cu 3Oy (REBCO) films is actively discussed. However, the growth mechanisms of the BZO nanorods are still evidently unexplained. In this study, in order to control the growth of BZO nanorods in REBCO films, we fabricated the Sm1+x,Ba2-x,Cu 30y (SmBCO) films containing BZO by conventional pulsed laser deposition (PLD-Sm+BZO) and Vapor-Liquid-Solid technique (VLS-Sm+BZO). The self field Jc's of PLD- and VLS-Sm+BZO films showed 1.3 MA/cm 2 and 1.2 MA/cm2, respectively. However, magnetic field dependence of the Jc for the VLS-Sm+BZO film was twice as high as that of the PLD-Sm+BZO film at 77 K, B = 5 T. From a microstructure analysis, we found the BZO nanorods in VLS-Sm+BZO film grew nearly straight along the c-axis of the SmBCO.

本文言語英語
論文番号5153222
ページ(範囲)3168-3171
ページ数4
ジャーナルIEEE Transactions on Applied Superconductivity
19
3
DOI
出版ステータス出版済み - 6 1 2009

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

フィンガープリント 「Flux pinning properties and microstructure in Sm<sub>1+x</sub>Ba <sub>2-x</sub>Cu<sub>3</sub>O<sub>y</sub> films with BaZrO<sub>3</sub> nanorods fabricated by vapor-liquid-solid growth technique」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル