Friction and Wear of Cam and Ceramics Tappet

Mitsuhiro Soejima, Yoshito Ejima, Yutaro Wakuri, Tatsumi Kitahara, Motokazu Kobayashi, Takao Takano, Naozumi Arimoto, Yasuhiko Hirata

研究成果: Contribution to journalArticle査読

1 被引用数 (Scopus)

抄録

As the application of low-viscosity oil progresses to reduce friction losses in IC engines, the increases of friction, wear and scuffing are concerned for the sliding surfaces in tribo-components. According to the physical and chemical properties of interface materials and lubricants, the analytical study on thermal friction characteristics of the boundary lubrication has been conducted to investigate the effect of temperature on the function of oil additives as friction modifies and/or anti-scuffing agents. Three base oils with low viscosities, three extreme pressure anti-wear agents and two organo-molybdenum friction modifiers were used to measure friction changes with a cam/follower test apparatus. The functional sensitivity of additives in low-viscosity oils is considered by analyzing relationships between friction and temperature in the running-in process of interfaces. The analysis is based on physicochemical properties such that all of the oil viscosity, the adsorption of oil molecules, the chemical reaction of oil additives forming the tribo-film low in shear stress and the strength of interface materials are due to the exponential function of the temperature just like the Arrhenius’ equation. From the analysis it has been found that the frictional shear stress depends on the involvement intensity of surface temperature in influences of oil viscosity, molecular adsorption / desorption and tribo-film formation for each term of running-in.
本文言語英語
論文番号8
ページ(範囲)43
ページ数50
ジャーナルToraibarojisuto/Journal of Japanese Society of Tribologists
39
1
出版ステータス出版済み - 1 15 1994

フィンガープリント 「Friction and Wear of Cam and Ceramics Tappet」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル