Growth mechanism of Y123 film by MOD-TFA method

Tetsuji Honjo, Hiroshi Fuji, Yuichi Nakamura, Teruo Izumi, Yuh Shiohara, Junko Shibata, Takahisa Yamamoto, Yuichi Ikuhara, Ryo Teranishi, Masahiro Yoshimura

研究成果: Contribution to journalArticle査読

12 被引用数 (Scopus)

抄録

In order to clarify the growth mechanism of Y123 film in the MOD process using TFA, TEM observation of the quenched samples during the growth, and measurement of the growth rate under several different conditions were carried out. TEM observation showed that the Y2Cu2O5, BaF2 and CuO are converted into Y123 by release of HF due to supplying H2O at the reaction interface. The MOD-TFA process using the multi-coating method was applied to form thicker Y123 films on LaAlO3 substrates, and the growth mechanism for the Y123 crystallization was investigated. In order to evaluate the growth rate, the electrical resistance of the precursor films during the crystallization was measured by the DC 4-probe method. It was observed that the growth thickness of the Y123 linearly increases with increasing annealing time. This result suggests that the growth rate is not limited by the HF diffusion in the precursor film. According to the gas flow rate dependence of the growth rate, it was suggested that the growth of Y123 films in this process might be limited by both the HF diffusion in the boundary layer and the interface kinetics. Then, the growth model, which includes the two limiting systems, was proposed. This model reveals a basic idea of the mechanism to determine the steady state growth rate.

本文言語英語
ページ(範囲)151-154
ページ数4
ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
66
3
DOI
出版ステータス出版済み - 3 2002
外部発表はい

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント 「Growth mechanism of Y123 film by MOD-TFA method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル