Hardware-in-the-loop (Hil) and experimental findings for the 7 kw pumping kite power system

Tarek N. Dief, Mostafa A. Rushdi, Amr M. Halawa, Shigeo Yoshida

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

2 被引用数 (Scopus)

抄録

This paper presents the experimental work of airborne wind energy, kite system, as a power source, developed in Kyushu University. Kite extracts more energy from high altitude wind with less foundations compared with the wind turbines. This paper demonstrates the 7kW kite system of Kyushu University including the system’s design, tests, and experimental results. The kite system consists of inflatable wing with fixed tether length. The kite is controlled by small device, kite control unit (KCU), as a hardware-in the loop (HIL). This technique is utilized to develop and perform the real-time flight test of the kite. It provides an effective algorithm by adding the complexity of the system under control. Several tests had been performed to analyse the kite performance, and tension forces result from those tests are presented in different truck speeds and flight cases.

本文言語英語
ホスト出版物のタイトルAIAA Scitech 2020 Forum
出版社American Institute of Aeronautics and Astronautics Inc, AIAA
ISBN(印刷版)9781624105951
DOI
出版ステータス出版済み - 2020
イベントAIAA Scitech Forum, 2020 - Orlando, 米国
継続期間: 1月 6 20201月 10 2020

出版物シリーズ

名前AIAA Scitech 2020 Forum
1 PartF

会議

会議AIAA Scitech Forum, 2020
国/地域米国
CityOrlando
Period1/6/201/10/20

!!!All Science Journal Classification (ASJC) codes

  • 航空宇宙工学

フィンガープリント

「Hardware-in-the-loop (Hil) and experimental findings for the 7 kw pumping kite power system」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル