Hayabusa2 Sampler

Collection of Asteroidal Surface Material

Hayabusa2 SMP Team

研究成果: ジャーナルへの寄稿評論記事

12 引用 (Scopus)

抄録

Japan Aerospace Exploration Agency (JAXA) launched the asteroid exploration probe “Hayabusa2” in December 3rd, 2014, following the 1st Hayabusa mission. With technological and scientific improvements from the Hayabusa probe, we plan to visit the C-type asteroid 162137 Ryugu (1999 JU3), and to sample surface materials of the C-type asteroid that is likely to be different from the S-type asteroid Itokawa and contain more pristine materials, including organic matter and/or hydrated minerals, than S-type asteroids. We developed the Hayabusa2 sampler to collect a minimum of 100 mg of surface samples including several mm-sized particles at three surface locations without any severe terrestrial contamination. The basic configuration of the sampler design is mainly as same as the 1st Hayabusa (Yano et al. in Science, 312(5778):1350–1353, 2006), with several minor but important modifications based on lessons learned from the Hayabusa to fulfill the scientific requirements and to raise the scientific value of the returned samples. In this paper, we will report the details of the sampling system of Hayabusa2 with results of performance tests during the development and the current status of the sampling system.

元の言語英語
ページ(範囲)81-106
ページ数26
ジャーナルSpace Science Reviews
208
発行部数1-4
DOI
出版物ステータス出版済み - 7 1 2017

Fingerprint

samplers
asteroids
asteroid
sampler
sampling
probe
probes
lessons learned
performance tests
organic materials
Japan
contamination
minerals
material
organic matter
requirements
mineral
configurations

All Science Journal Classification (ASJC) codes

  • Astronomy and Astrophysics
  • Space and Planetary Science

これを引用

Hayabusa2 Sampler : Collection of Asteroidal Surface Material. / Hayabusa2 SMP Team.

:: Space Science Reviews, 巻 208, 番号 1-4, 01.07.2017, p. 81-106.

研究成果: ジャーナルへの寄稿評論記事

Hayabusa2 SMP Team. / Hayabusa2 Sampler : Collection of Asteroidal Surface Material. :: Space Science Reviews. 2017 ; 巻 208, 番号 1-4. pp. 81-106.
@article{001862f979a941b3b8822f63dd3812c6,
title = "Hayabusa2 Sampler: Collection of Asteroidal Surface Material",
abstract = "Japan Aerospace Exploration Agency (JAXA) launched the asteroid exploration probe “Hayabusa2” in December 3rd, 2014, following the 1st Hayabusa mission. With technological and scientific improvements from the Hayabusa probe, we plan to visit the C-type asteroid 162137 Ryugu (1999 JU3), and to sample surface materials of the C-type asteroid that is likely to be different from the S-type asteroid Itokawa and contain more pristine materials, including organic matter and/or hydrated minerals, than S-type asteroids. We developed the Hayabusa2 sampler to collect a minimum of 100 mg of surface samples including several mm-sized particles at three surface locations without any severe terrestrial contamination. The basic configuration of the sampler design is mainly as same as the 1st Hayabusa (Yano et al. in Science, 312(5778):1350–1353, 2006), with several minor but important modifications based on lessons learned from the Hayabusa to fulfill the scientific requirements and to raise the scientific value of the returned samples. In this paper, we will report the details of the sampling system of Hayabusa2 with results of performance tests during the development and the current status of the sampling system.",
author = "{Hayabusa2 SMP Team} and Hirotaka Sawada and Ryuji Okazaki and Ryuji Okazaki and Kanako Sakamoto and Yoshinori Takano and Chisato Okamoto and Hajime Yano and Yayoi Miura and Masanao Abe and Sunao Hasegawa and Takaaki Noguchi",
year = "2017",
month = "7",
day = "1",
doi = "10.1007/s11214-017-0338-8",
language = "English",
volume = "208",
pages = "81--106",
journal = "Space Science Reviews",
issn = "0038-6308",
publisher = "Springer Netherlands",
number = "1-4",

}

TY - JOUR

T1 - Hayabusa2 Sampler

T2 - Collection of Asteroidal Surface Material

AU - Hayabusa2 SMP Team

AU - Sawada, Hirotaka

AU - Okazaki, Ryuji

AU - Okazaki, Ryuji

AU - Sakamoto, Kanako

AU - Takano, Yoshinori

AU - Okamoto, Chisato

AU - Yano, Hajime

AU - Miura, Yayoi

AU - Abe, Masanao

AU - Hasegawa, Sunao

AU - Noguchi, Takaaki

PY - 2017/7/1

Y1 - 2017/7/1

N2 - Japan Aerospace Exploration Agency (JAXA) launched the asteroid exploration probe “Hayabusa2” in December 3rd, 2014, following the 1st Hayabusa mission. With technological and scientific improvements from the Hayabusa probe, we plan to visit the C-type asteroid 162137 Ryugu (1999 JU3), and to sample surface materials of the C-type asteroid that is likely to be different from the S-type asteroid Itokawa and contain more pristine materials, including organic matter and/or hydrated minerals, than S-type asteroids. We developed the Hayabusa2 sampler to collect a minimum of 100 mg of surface samples including several mm-sized particles at three surface locations without any severe terrestrial contamination. The basic configuration of the sampler design is mainly as same as the 1st Hayabusa (Yano et al. in Science, 312(5778):1350–1353, 2006), with several minor but important modifications based on lessons learned from the Hayabusa to fulfill the scientific requirements and to raise the scientific value of the returned samples. In this paper, we will report the details of the sampling system of Hayabusa2 with results of performance tests during the development and the current status of the sampling system.

AB - Japan Aerospace Exploration Agency (JAXA) launched the asteroid exploration probe “Hayabusa2” in December 3rd, 2014, following the 1st Hayabusa mission. With technological and scientific improvements from the Hayabusa probe, we plan to visit the C-type asteroid 162137 Ryugu (1999 JU3), and to sample surface materials of the C-type asteroid that is likely to be different from the S-type asteroid Itokawa and contain more pristine materials, including organic matter and/or hydrated minerals, than S-type asteroids. We developed the Hayabusa2 sampler to collect a minimum of 100 mg of surface samples including several mm-sized particles at three surface locations without any severe terrestrial contamination. The basic configuration of the sampler design is mainly as same as the 1st Hayabusa (Yano et al. in Science, 312(5778):1350–1353, 2006), with several minor but important modifications based on lessons learned from the Hayabusa to fulfill the scientific requirements and to raise the scientific value of the returned samples. In this paper, we will report the details of the sampling system of Hayabusa2 with results of performance tests during the development and the current status of the sampling system.

UR - http://www.scopus.com/inward/record.url?scp=85012889813&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85012889813&partnerID=8YFLogxK

U2 - 10.1007/s11214-017-0338-8

DO - 10.1007/s11214-017-0338-8

M3 - Review article

VL - 208

SP - 81

EP - 106

JO - Space Science Reviews

JF - Space Science Reviews

SN - 0038-6308

IS - 1-4

ER -