Helium and hydrogen trapping in tungsten deposition layers formed by helium plasma sputtering

Kazunari Katayama, K. Imaoka, T. Okamura, M. Nishikawa

研究成果: ジャーナルへの寄稿記事

22 引用 (Scopus)

抜粋

Tungsten deposition layers were formed by helium plasma sputtering utilizing a capacitively coupled RF plasma. For comparison, hydrogen plasma was also used for the formation of the deposition layer. It was found that non-negligible amount of helium and hydrogen were trapped in the tungsten deposition layer formed helium plasma sputtering. It is considered that the hydrogen emitted from the plasma chamber wall by helium plasma discharge was trapped in the layer. Atomic ratio of helium to tungsten (He/W) in the layer was estimated to be 0.08. This value is not quite small compared with that of hydrogen in the tungsten deposition layer formed by hydrogen plasma sputtering. The release behavior of helium from the layer formed by helium plasma sputtering was similar to that of hydrogen from the layer formed by hydrogen plasma sputtering.

元の言語英語
ページ(範囲)1645-1650
ページ数6
ジャーナルFusion Engineering and Design
82
発行部数15-24
DOI
出版物ステータス出版済み - 10 1 2007

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

これを引用