High heat load properties of nanostructured, recrystallized W-1.1TiC

K. Tokunaga, H. Kurishita, H. Arakawa, S. Matsuo, T. Hotta, K. Araki, Y. Miyamoto, T. Fujiwara, K. Nakamura, T. Takida, M. Kato, A. Ikegaya

研究成果: ジャーナルへの寄稿学術誌査読

20 被引用数 (Scopus)

抄録

Steady state (1973 K, 180 s) and repeated (723 K-1524 K, 380 times) heat loading experiments of ITER grade W and toughened, fine-grained, recrystallized W-1.1TiC (TFGR W-1.1TiC) have been performed using an electron beam irradiation system. In ITER grade W, the irradiation around 1973 K causes recrystallization and grain growth up to the average diameters of 50-100 μm. Repeated irradiations cause significant surface roughening, cracking at grain boundaries and surface exfoliation. On the other hand, TFGR W-1.1TiC does not exhibit any surface roughening or cracking after repeated heat loading although grain boundaries on the surface of TFGR W-1.1TiC can be observed after irradiation at around 1973 K 180 s by steady state heat loading.

本文言語英語
ページ(範囲)S297-S301
ジャーナルJournal of Nuclear Materials
442
1-3 SUPPL.1
DOI
出版ステータス出版済み - 2013

!!!All Science Journal Classification (ASJC) codes

  • 核物理学および高エネルギー物理学
  • 材料科学(全般)
  • 原子力エネルギーおよび原子力工学

フィンガープリント

「High heat load properties of nanostructured, recrystallized W-1.1TiC」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル