High performance from extraordinarily thick organic light-emitting diodes

Toshinori Matsusima, Fatima Bencheikh, Takeshi Komino, Matthew R. Leyden, Atula S.D. Sandanayaka, Chuanjiang Qin, Chihaya Adachi

研究成果: ジャーナルへの寄稿レター

1 引用 (Scopus)

抄録

Organic light-emitting diode (OLED) technology is promising for applications in next-generation displays and lighting. However, it is difficult—especially in large-area mass production—to cover a large substrate uniformly with organic layers, and variations in thickness cause the formation of shunting paths between electrodes1,2, thereby lowering device production yield. To overcome this issue, thicker organic transport layers are desirable because they can cover particles and residue on substrates, but increasing their thickness increases the driving voltage because of the intrinsically low charge-carrier mobilities of organics. Chemical doping of organic layers increases their electrical conductivity and enables fabrication of thicker OLEDs3,4, but additional absorption bands originating from charge transfer appear5, reducing electroluminescence efficiency because of light absorption. Thick OLEDs made with organic single crystals have been demonstrated6, but are not practical for mass production. Therefore, an alternative method of fabricating thicker OLEDs is needed. Here we show that extraordinarily thick OLEDs can be fabricated by using the organic–inorganic perovskite methylammonium lead chloride, CH3NH3PbCl3 (MAPbCl3), instead of organics as the transport layers. Because MAPbCl3 films have high carrier mobilities and are transparent to visible light, we were able to increase the total thickness of MAPbCl3 transport layers to 2,000 nanometres—more than ten times the thickness of standard OLEDs—without requiring high voltage or reducing either internal electroluminescence quantum efficiency or operational durability. These findings will contribute towards a higher production yield of high-quality OLEDs, which may be used for other organic devices, such as lasers, solar cells, memory devices and sensors.

元の言語英語
ページ(範囲)502-506
ページ数5
ジャーナルNature
572
発行部数7770
DOI
出版物ステータス出版済み - 8 22 2019

Fingerprint

Light
Equipment and Supplies
Electric Conductivity
Lighting
Lasers
Technology
methylamine
perovskite
lead chloride

All Science Journal Classification (ASJC) codes

  • General

これを引用

Matsusima, T., Bencheikh, F., Komino, T., Leyden, M. R., Sandanayaka, A. S. D., Qin, C., & Adachi, C. (2019). High performance from extraordinarily thick organic light-emitting diodes. Nature, 572(7770), 502-506. https://doi.org/10.1038/s41586-019-1435-5

High performance from extraordinarily thick organic light-emitting diodes. / Matsusima, Toshinori; Bencheikh, Fatima; Komino, Takeshi; Leyden, Matthew R.; Sandanayaka, Atula S.D.; Qin, Chuanjiang; Adachi, Chihaya.

:: Nature, 巻 572, 番号 7770, 22.08.2019, p. 502-506.

研究成果: ジャーナルへの寄稿レター

Matsusima, T, Bencheikh, F, Komino, T, Leyden, MR, Sandanayaka, ASD, Qin, C & Adachi, C 2019, 'High performance from extraordinarily thick organic light-emitting diodes', Nature, 巻. 572, 番号 7770, pp. 502-506. https://doi.org/10.1038/s41586-019-1435-5
Matsusima T, Bencheikh F, Komino T, Leyden MR, Sandanayaka ASD, Qin C その他. High performance from extraordinarily thick organic light-emitting diodes. Nature. 2019 8 22;572(7770):502-506. https://doi.org/10.1038/s41586-019-1435-5
Matsusima, Toshinori ; Bencheikh, Fatima ; Komino, Takeshi ; Leyden, Matthew R. ; Sandanayaka, Atula S.D. ; Qin, Chuanjiang ; Adachi, Chihaya. / High performance from extraordinarily thick organic light-emitting diodes. :: Nature. 2019 ; 巻 572, 番号 7770. pp. 502-506.
@article{467d35572e33451dbfc04b84b123605d,
title = "High performance from extraordinarily thick organic light-emitting diodes",
abstract = "Organic light-emitting diode (OLED) technology is promising for applications in next-generation displays and lighting. However, it is difficult—especially in large-area mass production—to cover a large substrate uniformly with organic layers, and variations in thickness cause the formation of shunting paths between electrodes1,2, thereby lowering device production yield. To overcome this issue, thicker organic transport layers are desirable because they can cover particles and residue on substrates, but increasing their thickness increases the driving voltage because of the intrinsically low charge-carrier mobilities of organics. Chemical doping of organic layers increases their electrical conductivity and enables fabrication of thicker OLEDs3,4, but additional absorption bands originating from charge transfer appear5, reducing electroluminescence efficiency because of light absorption. Thick OLEDs made with organic single crystals have been demonstrated6, but are not practical for mass production. Therefore, an alternative method of fabricating thicker OLEDs is needed. Here we show that extraordinarily thick OLEDs can be fabricated by using the organic–inorganic perovskite methylammonium lead chloride, CH3NH3PbCl3 (MAPbCl3), instead of organics as the transport layers. Because MAPbCl3 films have high carrier mobilities and are transparent to visible light, we were able to increase the total thickness of MAPbCl3 transport layers to 2,000 nanometres—more than ten times the thickness of standard OLEDs—without requiring high voltage or reducing either internal electroluminescence quantum efficiency or operational durability. These findings will contribute towards a higher production yield of high-quality OLEDs, which may be used for other organic devices, such as lasers, solar cells, memory devices and sensors.",
author = "Toshinori Matsusima and Fatima Bencheikh and Takeshi Komino and Leyden, {Matthew R.} and Sandanayaka, {Atula S.D.} and Chuanjiang Qin and Chihaya Adachi",
year = "2019",
month = "8",
day = "22",
doi = "10.1038/s41586-019-1435-5",
language = "English",
volume = "572",
pages = "502--506",
journal = "Nature",
issn = "0028-0836",
publisher = "Nature Publishing Group",
number = "7770",

}

TY - JOUR

T1 - High performance from extraordinarily thick organic light-emitting diodes

AU - Matsusima, Toshinori

AU - Bencheikh, Fatima

AU - Komino, Takeshi

AU - Leyden, Matthew R.

AU - Sandanayaka, Atula S.D.

AU - Qin, Chuanjiang

AU - Adachi, Chihaya

PY - 2019/8/22

Y1 - 2019/8/22

N2 - Organic light-emitting diode (OLED) technology is promising for applications in next-generation displays and lighting. However, it is difficult—especially in large-area mass production—to cover a large substrate uniformly with organic layers, and variations in thickness cause the formation of shunting paths between electrodes1,2, thereby lowering device production yield. To overcome this issue, thicker organic transport layers are desirable because they can cover particles and residue on substrates, but increasing their thickness increases the driving voltage because of the intrinsically low charge-carrier mobilities of organics. Chemical doping of organic layers increases their electrical conductivity and enables fabrication of thicker OLEDs3,4, but additional absorption bands originating from charge transfer appear5, reducing electroluminescence efficiency because of light absorption. Thick OLEDs made with organic single crystals have been demonstrated6, but are not practical for mass production. Therefore, an alternative method of fabricating thicker OLEDs is needed. Here we show that extraordinarily thick OLEDs can be fabricated by using the organic–inorganic perovskite methylammonium lead chloride, CH3NH3PbCl3 (MAPbCl3), instead of organics as the transport layers. Because MAPbCl3 films have high carrier mobilities and are transparent to visible light, we were able to increase the total thickness of MAPbCl3 transport layers to 2,000 nanometres—more than ten times the thickness of standard OLEDs—without requiring high voltage or reducing either internal electroluminescence quantum efficiency or operational durability. These findings will contribute towards a higher production yield of high-quality OLEDs, which may be used for other organic devices, such as lasers, solar cells, memory devices and sensors.

AB - Organic light-emitting diode (OLED) technology is promising for applications in next-generation displays and lighting. However, it is difficult—especially in large-area mass production—to cover a large substrate uniformly with organic layers, and variations in thickness cause the formation of shunting paths between electrodes1,2, thereby lowering device production yield. To overcome this issue, thicker organic transport layers are desirable because they can cover particles and residue on substrates, but increasing their thickness increases the driving voltage because of the intrinsically low charge-carrier mobilities of organics. Chemical doping of organic layers increases their electrical conductivity and enables fabrication of thicker OLEDs3,4, but additional absorption bands originating from charge transfer appear5, reducing electroluminescence efficiency because of light absorption. Thick OLEDs made with organic single crystals have been demonstrated6, but are not practical for mass production. Therefore, an alternative method of fabricating thicker OLEDs is needed. Here we show that extraordinarily thick OLEDs can be fabricated by using the organic–inorganic perovskite methylammonium lead chloride, CH3NH3PbCl3 (MAPbCl3), instead of organics as the transport layers. Because MAPbCl3 films have high carrier mobilities and are transparent to visible light, we were able to increase the total thickness of MAPbCl3 transport layers to 2,000 nanometres—more than ten times the thickness of standard OLEDs—without requiring high voltage or reducing either internal electroluminescence quantum efficiency or operational durability. These findings will contribute towards a higher production yield of high-quality OLEDs, which may be used for other organic devices, such as lasers, solar cells, memory devices and sensors.

UR - http://www.scopus.com/inward/record.url?scp=85069897764&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85069897764&partnerID=8YFLogxK

U2 - 10.1038/s41586-019-1435-5

DO - 10.1038/s41586-019-1435-5

M3 - Letter

C2 - 31358964

AN - SCOPUS:85069897764

VL - 572

SP - 502

EP - 506

JO - Nature

JF - Nature

SN - 0028-0836

IS - 7770

ER -