High-temperature in-situ TEM straining of the interaction with dislocations and particles for Cu-added ferritic stainless steel

Shuhei Kobayashi, Kenji Kaneko, Kazuhiro Yamada, Masao Kikuchi, Norihiro Kanno, Jun Ichi Hamada

    研究成果: ジャーナルへの寄稿学術誌査読

    4 被引用数 (Scopus)

    抄録

    Synopsis : Cu is always present in the matrix when ferritic steels were prepared from ferrous scrap. When the ferritic steels are aged thermally, Cu precipitates start appearing and dispersing finely and homogeneously, which may result the steels strengthened by precipitation hardening. In this study, the interactions between Cu precipitates and dislocations were examined via high-temperature in-situ TEM straining. Cu-added ferritic stainless steel (Fe-18.4%Cr-1.5%Cu) was used in the present study. Specimen was aged at 1073 K for 360 ks. Microstructure of specimen was analyzed by JEM-3200FSK and high-temperature in-situ TEM straining was conducted using JEM-1300NEF. Progressing dislocations in matrix contacted with the Cu precipitate at right angle. This result implies that there is an attractive interaction between dislocations and the Cu precipitate. Furthermore, dislocations pass through the particle after contacting it, so that the interaction with dislocations and particles should be explained by Srolovitz mechanism.

    本文言語英語
    ページ(範囲)315-318
    ページ数4
    ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
    101
    6
    DOI
    出版ステータス出版済み - 2015

    !!!All Science Journal Classification (ASJC) codes

    • 凝縮系物理学
    • 物理化学および理論化学
    • 金属および合金
    • 材料化学

    フィンガープリント

    「High-temperature in-situ TEM straining of the interaction with dislocations and particles for Cu-added ferritic stainless steel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル