Highly selective photocatalytic reduction of carbon dioxide with water over silver-loaded calcium titanate

Akihiko Anzai, Naoto Fukuo, Akira Yamamoto, Hisao Yoshida

研究成果: ジャーナルへの寄稿学術誌査読

44 被引用数 (Scopus)

抄録

The once reported Ag-modified CaTiO3 photocatalyst was reexamined by optimizing the Ag loading amount and using a conventional photochemical reactor. This revealed that the Ag-modified CaTiO3 photocatalyst actually showed both high production rate of CO (54 μmol h−1) and excellent selectivity towards CO formation (94%) by suppressing the H2 production via water splitting. It is suggested that the high photocatalytic performance originates from not only the optimized amount of cocatalyst and the high irradiation light intensity but also the high concentration of dissolved CO2 that was achieved by a bubbling flow of CO2 at the lower reaction temperature. These reaction conditions provided ca. 40 times higher CO formation rate. It was proposed that the deposited small Ag nanoparticles are the selective active sites for CO formation and the CaTiO3 crystal surface produces H2 preferably.

本文言語英語
ページ(範囲)134-138
ページ数5
ジャーナルCatalysis Communications
100
DOI
出版ステータス出版済み - 2017
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 触媒
  • 化学 (全般)
  • プロセス化学およびプロセス工学

フィンガープリント

「Highly selective photocatalytic reduction of carbon dioxide with water over silver-loaded calcium titanate」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル