Highwall mining systems at surface coal mines in Indonesia

K. Matsui, Takashi Sasaoka, Hideki Shimada, J. T. Ueda, J. S. Kramadibrata, B. Sulistianto

研究成果: 専門家出版物への寄稿タイプ 記事

8 引用 (Scopus)

抜粋

Various highwall mining systems in surface coal mines in Indonesia and their geotechnical and operational problems are discussed. The punch board highwall mining system is introduced in the coal mines in Indonesia as it is the best and most effective mining system for the coal mine conditions. Safe mining system in highwall mining helps in improving high mining operations. The punch longwall mining system for open cut mining helps in coal recovery and in understanding of the underground mining in Indonesia but due to high cost associated with it and the geological conditions makes its introduction unfeasible. The punch board and pillar mining systems is best for Indonesian coal mines because it exhibit some of the properties including drilling and blasting, continuous or roadheader cutting, pillar recovery using hydraulic prop and cap system, higher productivity and flexibility even under poor geological conditions.

元の言語英語
ページ28-31
ページ数4
256
いいえ3
研究者出版物Coal International
出版物ステータス出版済み - 5 1 2008

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Fuel Technology
  • Energy Engineering and Power Technology
  • Geotechnical Engineering and Engineering Geology
  • Mechanical Engineering

これを引用

Matsui, K., Sasaoka, T., Shimada, H., Ueda, J. T., Kramadibrata, J. S., & Sulistianto, B. (2008). Highwall mining systems at surface coal mines in Indonesia. Coal International, 256(3), 28-31.